Rack Installation Precautions - Promise Technology VSky H3970 Quick Start Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
VSky H3970 Quick Start Guide

Rack installation precautions

Cautions
• Do not populate any unit with hard drives until it
has been securely installed in the rack.
• At least two persons are required to safely lift,
place, and attach the unit into a rack system.
• Do not lift or move the unit by the handles, power
supplies or the controller units. Hold the system
itself.
• Do not install the unit into a rack without rails to
support the system.
• Only a qualified technician who is familiar with
the installation procedure should mount and
install the unit.
• Mount the rails to the rack using the appropriate
screws and flange nuts, fully tightened, at each
end of the rail.
• Do not load the rails unless they are installed with
screws as instructed.
• The rails available for the PROMISE VSky H3970
unit are designed to safely support that PROMISE
VSky H3970 unit when properly installed.
Additional loading on the rails is at the customer's
risk.
• PROMISE Technology, Inc. cannot guarantee that
the mounting rails will support your PROMISE VSky
H3970 unit unless you install them as instructed
in the printed instructions packed with the rail
hardware.
6
Promise Technology, Inc.

Advertisement

Table of Contents
loading

Table of Contents