Modine Manufacturing HD 100 Installation Instructions

Two-Point Mounted Unit Heater
WARNING
Gas supply shall be shut-off and the electrical power
disconnected before proceeding with the conversion.
Failure to do so could result in fire, explosion, electrical
shock, or the unit starting suddenly resulting in injury.
IMPORTANT
1. The use of this manual is specifically intended for a
qualified installation and service agency. All installation
and service of these kits must be performed by a
qualified installation and service agency.
2. These instructions must also be used in conjunction
with the Installation and Service (I&S) Manual originally
shipped with the appliance being converted, in addition
to any other accompanying component supplier
literature.
PLEASE BE SURE TO LEAVE IT WITH THE OWNER WHEN YOU LEAVE THE JOB.
models HD/HDS (100 & 125 only), PTC, PTS, PTP, PDP (350 &400)
THIS MANUAL IS THE PROPERTY OF THE OWNER.

INSTALLATION INSTRUCTIONS

2-POINT MOUNTING KIT
Model Application
On occasion, building structures may not easily accommodate
the standard four-point unit suspension on HD/HDS (100 &
125 only), PTC (85-310 only), PTS, PTP, PDP (350 &400)
models. For those cases, Modine offers a two-point mounting
conversion kit, which can be used to convert the unit to two-
point suspension. The conversion kit includes two heavy
gauge "C" channel brackets and two angle brackets, along
with required fasteners to attach the brackets to the heater.
To ensure adequate suspension of the unit is achieved, follow
these instructions in detail. For complete unit installation
instructions, please refer to the latest revision of the
Installation & Service Manual that shipped with the unit.
These are summarized in Table 1.1.
Figure 2.2 – Angle Bracket Installation
Model
HD 100 & 125
HDS 100 & 125
PTC (85–310)
PTS,
PDP 350 & 400
PTP
 As shipped with the unit, or latest revision.
Detailed instructions for the assembly/installation of
the two-point mounting kit are on the reverse side of
this sheet.
6-574.2
5H081079A
Sept, 2015
two-point mounting kit
Installation & Service
Manual
6-583 
6-584 
6-563 
6-561 
6-580 
6-560 