Modine Manufacturing Heatcraft Installation, Operation And Maintenance Manual

INSTALLATION, OPERATION AND MAINTENANCE GUIDE
CONDENSER COIL INSTALLATION,
OPERATION AND MAINTENANCE
Guidelines for the installation, operation and maintenance of
the Heatcraft brand of refrigerant condenser coils manufac-
tured by Modine in Grenada, MS have been provided to help
insure proper performance of the coils and their longevity.
These are general guidelines that may have to be tailored to
meet the specific requirements of any one job. As always, a
qualified party or technician should perform the installation
and maintenance of any coil. Protective equipment such as
safety glasses, steel toe boots and gloves are recommended
during the installation and routine maintenance of the coil.
RECEIVING INSTRUCTIONS
All Heatcraft coils are factory tested, inspected and carefully
packaged.
Damage to the coils can occur after they have left the factory.
Therefore, the coils should be inspected for shipping dam-
age upon receipt. The freight bill should also be checked
against items received for complete delivery. Damaged and/or
missing items should be noted on the carrier's freight bill and
signed by the driver.
For additional assistance, contact your local Modine coil
representative.