Cincoze CV-100/P2000 Series User Manual
  1. Manuals
  2. Brands
  3. Cincoze Manuals
  4. Touch Panel
  5. CV-100/P2000 Series
  6. User manual

Cincoze CV-100/P2000 Series User Manual

Industrial panel pc
Hide thumbs Also See for CV-100/P2000 Series:
Table of Contents

Advertisement

Quick Links

Industrial Panel PC
Industrial Panel PC
Performance & Power Efficient Series
CV-100/P2000 Series

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CV-100/P2000 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Cincoze CV-100/P2000 Series

Summary of Contents for Cincoze CV-100/P2000 Series

  • Page 1 Industrial Panel PC Industrial Panel PC Performance & Power Efficient Series CV-100/P2000 Series...

  • Page 2: Table Of Contents

    Industrial Panel PC | User’s Manual CV-100/P2000 Series Contents Preface Revision …………………………………………….……..……………….……….. 04 Copyright Notice …………………………………………………………………… 04 Acknowledgement …………………………………………….………....04 Disclaimer ………………………………………………………….……………….. 04 Declaration of Conformity ……………………………………….………………… 04 Product Warranty Statement ……………………………………….…………….. 05 Technical Support and Assistance ………………………………….……………. 06 Conventions Used in this Manual …………………………………….………….. 06 Safety Precaution …..…………………………………….…………….…………..
  • Page 3 Industrial Panel PC | User’s Manual CV-100/P2000 Series 3.15 Installing a CFast Card……………….….…………..….……………..74 3.16 Connecting with CV Display Module……….…..….…………………... 75 3.17 VESA Mount………………….…..……….…..….………………..…...78 3.18 Wall Mount..………………….…..……….…..….………………..…... 79 Chapter 4 BIOS Setup 4.1 BIOS Introduction …….……….…………….…….…..….…………... 82 4.2 Main Setup ……..……….………………….…..….………………..83 4.2.1 System Date …….……………………………………………..

  • Page 4: Revision

    2018/10/17 Copyright Notice © 2017 by Cincoze Co., Ltd. All rights are reserved. No parts of this manual may be copied, modified, or reproduced in any form or by any means for commercial use without the prior written permission of Cincoze Co., Ltd.

  • Page 5: Product Warranty Statement

    (such as a fuse, battery, etc.), re not warranted. Before sending your product in, you will need to fill in Cincoze RMA Request Form and obtain a RMA number from us. Our staff is available at any time to provide you with the most friendly and immediate service.

  • Page 6: Technical Support And Assistance

    | User’s Manual CV-100/P2000 Series Prefaces Technical Support and Assistance 1. Visit the Cincoze website at www.cincoze.com where you can find the latest information about the product. 2. Contact your distributor or our technical support team or sales representative for technical support if you need additional assistance.

  • Page 7: Safety Precaution

    Industrial Panel PC | User’s Manual CV-100/P2000 Series Safety Precautions Before installing and using this device, please note the following precautions: 1. Read these safety instructions carefully. 2. Keep this User’s Manual for future reference. 3. Disconnected this equipment from any AC outlet before cleaning.

  • Page 8: Package Contents

    Industrial Panel PC | User’s Manual CV-100/P2000 Series Package Contents Before installation, please ensure all the items listed in the following table are included in the package. Q’ty Item Description Panel PC Utility DVD Driver Screw Pack Power Terminal Block Connector...
  • Page 9 Industrial Panel PC | User’s Manual CV-100/P2000 Series Ordering Information Model No. Product Description CV-112R-R10/P2002-i5- 12.1" TFT SVGA 4:3 Panel PC with Resistive 5-wire Touch and Intel 6th Gen. Core i5-6300U Fanless Computer, CFM Interface, CDS Interface 12.1" TFT SVGA 4:3 Panel PC with Resistive 5-wire Touch and Intel 6th CV-112R-R10/P2002E- Gen.
  • Page 10 Industrial Panel PC | User’s Manual CV-100/P2000 Series Model No. Product Description CV-112HR- 12.1" TFT XGA 4:3 Panel PC with Resistive 5-wire Touch and Intel 6th R10/P2002-i5-R10 Gen. Core i5-6300U Fanless Computer, CFM Interface, CDS Interface 12.1" TFT XGA 4:3 Panel PC with Resistive 5-wire Touch and Intel 6th CV-112HR- Gen.
  • Page 11 Industrial Panel PC | User’s Manual CV-100/P2000 Series Model No. Product Description CV-115R-R10/P2002-i5- 15" TFT XGA 4:3 Panel PC with Resistive 5-wire Touch and Intel 6th Gen. Core i5-6300U Fanless Computer, CFM Interface, CDS Interface 15" TFT XGA 4:3 Panel PC with Resistive 5-wire Touch and Intel 6th CV-115R-R10/P2002E- Gen.
  • Page 12 Industrial Panel PC | User’s Manual CV-100/P2000 Series Model No. Product Description 15.6" TFT WXGA 16:9 Panel PC with Resistive 5-wire Touch and Intel CV-W115R- 6th Gen. Core i5-6300U Fanless Computer, CFM Interface, CDS R10/P2002-i5-R10 Interface 15.6" TFT WXGA 16:9 Panel PC with Resistive 5-wire Touch and Intel CV-W115R- 6th Gen.
  • Page 13 Industrial Panel PC | User’s Manual CV-100/P2000 Series Model No. Product Description CV-117R-R10/P2002-i5- 17" TFT SXGA 5:4 Panel PC with Resistive 5-wire Touch and Intel 6th Gen. Core i5-6300U Fanless Computer, CFM Interface, CDS Interface 17" TFT SXGA 5:4 Panel PC with Resistive 5-wire Touch and Intel 6th CV-117R-R10/P2002E- Gen.
  • Page 14 Industrial Panel PC | User’s Manual CV-100/P2000 Series Model No. Product Description 17" TFT SXGA 5:4 Panel PC with Projected Capacitive Touch and Intel CV-117C-R10/P2002- 6th Gen. Core i3-6100U Fanless Computer, CFM Interface, CDS i3-R10 Interface 17" TFT SXGA 5:4 Panel PC with Projected Capacitive Touch and Intel CV-117C-R10/P2002E- 6th Gen.
  • Page 15 Industrial Panel PC | User’s Manual CV-100/P2000 Series Model No. Product Description CV-119G-R10/P2002- 19" TFT SXGA 5:4 Panel PC without Touch, w/ Intel 6th Gen. Core i5- i5-R10 6300U Fanless Computer, CFM Interface, CDS Interface CV-119G- 19" TFT SXGA 5:4 Panel PC without Touch, w/ Intel 6th Gen. Core i5-...

  • Page 16: Ordering Information

    Industrial Panel PC | User’s Manual CV-100/P2000 Series Model No. Product Description 21.5" TFT Full HD 16:9 Panel PC with Resistive 5-wire Touch and Intel CV-W121R-R10/P2002- 6th Gen. Core i5-6300U Fanless Computer, CFM Interface, CDS i5-R10 Interface 21.5" TFT Full HD 16:9 Panel PC with Resistive 5-wire Touch and Intel CV-W121R- 6th Gen.
  • Page 17 Industrial Panel PC | User’s Manual CV-100/P2000 Series Model No. Product Description 21.5" TFT Full HD 16:9 Panel PC with Projected Capacitive Touch and CV-W121C- Intel 6th Gen. Core i3-6100U Fanless Computer, CFM Interface, CDS R10/P2002-i3-R10 Interface 21.5" TFT Full HD 16:9 Panel PC with Projected Capacitive Touch and CV-W121C- Intel 6th Gen.

  • Page 18: Chapter 1 Product Introductions

    Chapter 1 Product Introductions...

  • Page 19: Overview

    PoE and ignition sensing functions with additional CFM boards. In addition Cincoze offers a full series of Mini-PCIe Expansion I/O Card (MEC) for adding extra I/O through the universal bracket. The CV-100/P2000 Series comes with the slim version, and...

  • Page 20: Product Pictures

    Industrial Panel PC | User’s Manual CV-100/P2000 Series 1.3 Product pictures 1.4 key Features • 12.1“～21.5“ TFT-LCD with Resistive 5-wire or Projected Capacitive Touch • Onboard Intel® 6th Generation Core™ Processor U Series (15W) • 2x DDR4 SO-DIMM Socket, Support Up to 32 GB •...

  • Page 21: Hardware Specification

    Industrial Panel PC | User’s Manual CV-100/P2000 Series 1.5 Hardware Specification 1.5.1 CV-112/P2000 CV-112R/P2000 CV-112C/P2000 CV-112HR/P2000 CV-112HC/P2000 Display Display • LCD Size: 12.1" (4:3) • LCD Size: 12.1" (4:3) • Max. Resolution: 800 x 600 • Max. Resolution: 1024 x 768 •...
  • Page 22 Industrial Panel PC | User’s Manual CV-100/P2000 Series Processor System Storage • Onboard 6th Intel® Core™ U processors (Skylake) • 2x 2.5” SATA HDD/SSD Bay, Support RAID 0/1 (Gen3) - Intel® Core™ i5-6300U processor • 2x mSATA (One Shared by Mini-PCIe Socket) (Gen2) •...
  • Page 23 Industrial Panel PC | User’s Manual CV-100/P2000 Series Chapter 1: Product Introductions Dimensions CV-112/P2002 CV-112/P2002E...
  • Page 24 Industrial Panel PC | User’s Manual CV-100/P2000 Series 1.5.2 CV-115/P2000 CV-115R/P2000 CV-115C/P2000 Display • LCD Size: 15" (4:3) • Max. Resolution: 1024 x 768 • Brightness (cd/m2): 350 • Contrast Ratio: 800 : 1 • LCD Color: 16.2M • Pixel Pitch (mm): 0.297 (H) x 0.297 (V) •...
  • Page 25 Industrial Panel PC | User’s Manual CV-100/P2000 Series Processor System Storage • Onboard 6th Intel® Core™ U processors (Skylake) • 2x 2.5” SATA HDD/SSD Bay, Support RAID 0/1 (Gen3) - Intel® Core™ i5-6300U processor • 2x mSATA (One Shared by Mini-PCIe Socket) (Gen2) •...
  • Page 26 Industrial Panel PC | User’s Manual CV-100/P2000 Series Chapter 1: Product Introductions Dimensions CV-115/P2002 CV-115/P2002E...
  • Page 27 Industrial Panel PC | User’s Manual CV-100/P2000 Series 1.5.3 CV-W115/P2000 CV-W115R/P2000 CV-W115C/P2000 Display • LCD Size: 15.6" (16:9) • Max. Resolution: 1366 x 768 • Brightness (cd/m2): 400 • Contrast Ratio: 500 : 1 • LCD Color: 16.2M • Pixel Pitch (mm): 0.252 (H) x 0.252 (V) •...
  • Page 28 Industrial Panel PC | User’s Manual CV-100/P2000 Series Processor System Storage • Onboard 6th Intel® Core™ U processors (Skylake) • 2x 2.5” SATA HDD/SSD Bay, Support RAID 0/1 (Gen3) - Intel® Core™ i5-6300U processor • 2x mSATA (One Shared by Mini-PCIe Socket) (Gen2) •...
  • Page 29 Industrial Panel PC | User’s Manual CV-100/P2000 Series Chapter 1: Product Introductions Dimensions CV-W115/P2002 CV-W115/P2002E...
  • Page 30 Industrial Panel PC | User’s Manual CV-100/P2000 Series 1.5.4 CV-117/P2000 CV-117R/P2000 CV-117C/P2000 CV-117G/P2000 Display • LCD Size: 17" (5:4) • Max. Resolution: 1280 x 1024 • Brightness (cd/m2): 350 • Contrast Ratio: 800 : 1 • LCD Color: 16.7M • Pixel Pitch (mm): 0.264 (H) x 0.264 (V) •...
  • Page 31 Industrial Panel PC | User’s Manual CV-100/P2000 Series Processor System Storage • Onboard 6th Intel® Core™ U processors (Skylake) • 2x 2.5” SATA HDD/SSD Bay, Support RAID 0/1 (Gen3) - Intel® Core™ i5-6300U processor • 2x mSATA (One Shared by Mini-PCIe Socket) (Gen2) •...
  • Page 32 Industrial Panel PC | User’s Manual CV-100/P2000 Series Chapter 1: Product Introductions Dimensions CV-117/P2002 CV-117/P2002E...
  • Page 33 Industrial Panel PC | User’s Manual CV-100/P2000 Series 1.5.5 CV-119/P2000 CV-119R/P2000 CV-119C/P2000 CV-119G/P2000 Display • LCD Size: 19" (5:4) • Max. Resolution: 1280 x 1024 • Brightness (cd/m2): 350 • Contrast Ratio: 1000 : 1 • LCD Color: 16.7M • Pixel Pitch (mm): 0.294 (H) x 0.294 (V) •...
  • Page 34 Industrial Panel PC | User’s Manual CV-100/P2000 Series Processor System Storage • Onboard 6th Intel® Core™ U processors (Skylake) • 2x 2.5” SATA HDD/SSD Bay, Support RAID 0/1 (Gen3) - Intel® Core™ i5-6300U processor • 2x mSATA (One Shared by Mini-PCIe Socket) (Gen2) •...
  • Page 35 Industrial Panel PC | User’s Manual CV-100/P2000 Series Chapter 1: Product Introductions Dimensions CV-119/P2002 CV-119/P2002E...
  • Page 36 Industrial Panel PC | User’s Manual CV-100/P2000 Series 1.5.6 CV-W121/P2000 CV-W121R/P2000 CV-W121C/P2000 CV-W121G/P2000 Display • LCD Size: 21.5" (16:9) • Max. Resolution: 1920 x 1080 • Brightness (cd/m2): 300 • Contrast Ratio: 5000 : 1 • LCD Color: 16.7M • Pixel Pitch (mm): 0.24825 (H) x 0.24825 (V) •...
  • Page 37 Industrial Panel PC | User’s Manual CV-100/P2000 Series Processor System Storage • Onboard 6th Intel® Core™ U processors (Skylake) • 2x 2.5” SATA HDD/SSD Bay, Support RAID 0/1 (Gen3) - Intel® Core™ i5-6300U processor • 2x mSATA (One Shared by Mini-PCIe Socket) (Gen2) •...
  • Page 38 Industrial Panel PC | User’s Manual CV-100/P2000 Series Chapter 1: Product Introductions Dimensions CV-W121/P2002 CV-W121/P2002E...

  • Page 39: System I/O

    Industrial Panel PC | User’s Manual CV-100/P2000 Series 1.6 System I/O 1.6.1 Front DC IN USB 3.0 Used to plug a DC power input with terminal block Used to connect to USB 3.0/2.0/1.1 compatible devices DVI-D USB 2.0 Used to connect to an monitor with digital signal interface Used to connect to USB 2.0/1.1 compatible devices...

  • Page 40: Rear

    Industrial Panel PC | User’s Manual CV-100/P2000 Series 1.6.2 Rear CFast and SIM Card Power On/Off Switch CFast card and SIM card slot Power-on or power-off the system HDD/SSD 2.5” SATA HDD/SSD Bay, Support RAID 0/1 1.6.3 Left Antenna Hole...

  • Page 41: Right

    Industrial Panel PC | User’s Manual CV-100/P2000 Series 1.6.4 Right Antenna Hole Used to connect an antenna for optional Mini-PCIe Used to connect to RS-232/422/485 serial devices WiFi module 1.6.5 Top VESA Mounting Hole These are mounting holes for VESA mount (75x75mm and 100x100mm)
  • Page 42 Chapter 2 Jumpers, Switches & Connectors...

  • Page 43: Jumper Settings

    Industrial Panel PC | User’s Manual CV-100/P2000 Series 2.1 Jumpers Settings When setting the jumpers, ensure that the jumper caps are placed on the correct pins. When the jumper cap is placed on both pins, the jumper is short. If you remove the jumper cap, or place the jumper cap on just one pin, the jumper is open.

  • Page 44: Bottom View

    Industrial Panel PC | User’s Manual CV-100/P2000 Series 2.2.2 Bottom View...

  • Page 45: List Of Jumpers, Connectors And Switches

    Industrial Panel PC | User’s Manual CV-100/P2000 Series 2.3 List of Jumpers, Switches and Connectors Connector Location Definition AT_ATX1 AT / ATX Power Mode Switch BL_PWR1 Backlight Power on / off switching BL_UP1 Backlight Increase BL_DN1 Backlight Decrease CFAST1 CFast Connector...

  • Page 46: Definition Of Switches

    Industrial Panel PC | User’s Manual CV-100/P2000 Series 2.4 Definition of Switches Super CAP Function Setting: Pin Define SW2 Switch Switch mode Function Super CAP Enable (Default) Disable Clear CMOS Function Setting : Pin Define SW2 Switch Switch mode Function...
  • Page 47 Industrial Panel PC | User’s Manual CV-100/P2000 Series COM3/4/5/6 Voltage Function Setting : Pin Define SW1 Switch Switch mode Function ON/ON (Default) COM3 ON/OFF OFF/OFF ON/ON (Default) COM4 ON/OFF OFF/OFF ON/ON (Default) COM5 ON/OFF OFF/OFF ON/ON (Default) COM6 ON/OFF OFF/OFF...
  • Page 48 Industrial Panel PC | User’s Manual CV-100/P2000 Series AT_ATX1: AT / ATX Power Mode Switch Switch Definition 1-2 (Left) AT Power Mode ATX Power Mode（Default） 2-3 (Right) BL_PWR1: Backlight Power on / off Switch Definition Push Backlight Power on / off switching...
  • Page 49 Industrial Panel PC | User’s Manual CV-100/P2000 Series BL_DN1: Backlight Decrease Switch Definition Push Backlight Decrease RESET1: Reset Switch Switch Definition Push Reset System...

  • Page 50: Definition Of Connectors

    Industrial Panel PC | User’s Manual CV-100/P2000 Series 2.5 Definition of Connectors CFAST1: CFast Connector Definition Definition Definition PC10 SATA_TX2+ PC11 SATA_TX2- PC12 PC13 +3.3V SATA_RX2- PC14 +3.3V SATA_RX2+ PC15 PC16 PC17 SIM1：SIM Card Socket Definition UIM_PWR UIM_RESET UIM_CLK UIM_VPP...
  • Page 51 Industrial Panel PC | User’s Manual CV-100/P2000 Series COM1_1/COM2_1/(COM3_1/COM4_1/COM5_1/COM6_1 in the BTB Board): RS232 / RS422 / RS485 Connector Connector Type: 9-pin D-Sub RS422 / 485 RS485 RS232 Full Duplex Half Duplex Definition Definition Definition DATA- DATA+...
  • Page 52 Industrial Panel PC | User’s Manual CV-100/P2000 Series DC_IN1: DC Power Input Connector (+9~48V) Connector Type: Terminal Block 1X3 3-pin, 5.0mm pitch Definition +9~48VIN Ignition (IGN)
  • Page 53 Industrial Panel PC | User’s Manual CV-100/P2000 Series LAN1/LAN2: RJ45 with LEDs Port Definition Definition LAN1_MDI0P LAN1_MDI2N LAN1_MDI0N LAN1_MDI1N LAN1_MDI1P LAN1_MDI3P LAN1_MDI2P LAN1_MDI3N Act LED Status Definition Link LED Status Definition Blinking Yellow Data Activity Steady Green 1Gbps Network Link...
  • Page 54 Industrial Panel PC | User’s Manual CV-100/P2000 Series LINE_OUT1: Line-out Jack (Green) MIC1: Microphone Jack (Pink) Connector Type: 5-pin Phone Jack Connector Type: 5-pin Phone Jack Definition Definition OUT_R MIC_R OUT_L MIC_L CN1: Mini PCI-Express Socket (SIM Card to Link)
  • Page 55 Industrial Panel PC | User’s Manual CV-100/P2000 Series CN2: Mini PCI-Express Socket / mSATA Socket Definition Definition Definition WAKE# +3.3V +3.3V USB_D+ +3.3V PERST# PERN0/SATAPR0 +3.3V +1.5V +3.3VAUX CLKREQ# PERN0/SATARN0 +1.5V REFCLK+ SMB_CLK +1.5V REFCLK+ PETN0 SMB_DATA PETP0 +3.3V USB_D-...
  • Page 56 Industrial Panel PC | User’s Manual CV-100/P2000 Series CN3: mSATA Socket Definition Definition Definition WAKE# +3.3V +3.3V USB_D+ +3.3V PERST# SATARXP +3.3V +1.5V +3.3V SATARXN +1.5V SMB_CLK +1.5V SATATXN SMB_DATA SATATXP +3.3V USB_D-...
  • Page 57 Industrial Panel PC | User’s Manual CV-100/P2000 Series POWER3: Power Connector POWER4: Power Connector Connector Type: 1X4-pin Wafer, 2.0mm pitch Connector Type: 1X4-pin Wafer, 2.0mm pitch Definition Definition +12V +12V SATA1/SATA2: SATA with Power Connector Definition Definition SATA_TX+ SATA_TX- SATA_RX- SATA_RX+ +3.3V...
  • Page 58 Industrial Panel PC | User’s Manual CV-100/P2000 Series SPK_L1: Left Internal Speaker Connector Definition OUT_L SPK_R1: Right Internal Speaker Connector Definition OUT_R USB2_1: USB2.0 Connector, Type A Definition USB2_DATA1- USB2_DATA1+ USB3_1、USB3_2 : USB 3.0 Connector, Type A Definition Definition USB3_RX0+...
  • Page 59 Industrial Panel PC | User’s Manual CV-100/P2000 Series PWE_SW1: On / Off Switch FAN1: External PWM Fan Connector Connector Type: Terminal Block 1X3 3-pin, 3.5mm pitch Definition PWR_SW Definition +12V SENSE Control DIO1(Out): Digital Input / Output Connector Connector Type: Terminal Block 1X10 10-pin, 3.5mm pitch...
  • Page 60 Industrial Panel PC | User’s Manual CV-100/P2000 Series Power Ignition Setting (CFM-IGN100 Only) Connector Location Definition Ignition Function Setting 24V_12V_1 24V/ 12V Power Switching for Ignition Board IGN Board Pin define (CFM-IGN100 Only) SW2: Set shutdown delay timer when ACC is turned off...

  • Page 61: Chapter 3 System Setup

    Chapter 3 System Setup...

  • Page 62: Removing The Top Cover

    P2000 Series | User’s Manual Convertible Embedded Computer 3.1 Removing the Top Cover In order to prevent electric shock or system damage, before removing the chassis cover, must turn off power and disconnect the unit from power source. 1. Loosen the six screws at front and rear panel. 2.

  • Page 63: Installing A Half Size Mini Pcie Card

    P2000 Series | User’s Manual Convertible Embedded Computer 3.2 Installing a Half Size Mini PCIe Card 1. Locate the Mini PCIe socket on the system board. 2. Use two screws provided on adapter bracket to fasten the card and bracket together. 3.

  • Page 64: Installing A Full Size Mini Pcie Card

    P2000 Series | User’s Manual Convertible Embedded Computer 4. Press down the card and secure it with two screws. 3.3 Installing a Full Size Mini PCIe Card 1. Locate the Mini PCIe slot on the system board. 2. Tilt the Mini PCIe card at a 45-degree angle and insert it to the socket until the golden finger connector of the card seated firmly.

  • Page 65: Installing A Msata Card

    P2000 Series | User’s Manual Convertible Embedded Computer 3. Press the card down and secure it with 2 screws. 3.4 Installing a mSATA Card 1. Locate the mSATA slot on the system board. 2. Tilt the mSATA card at a 45-degree angle and insert it to the socket until the golden finger connector of the card seated firmly.

  • Page 66: Installing Antennas

    P2000 Series | User’s Manual Convertible Embedded Computer 3. Fasten the card with two screws. 3.5 Installing Antennas 1. Remove the antenna rubber covers on left and right panel. 2. Penetrate the antenna jack through the hole. CN-TB-QP22-44_V1.0...
  • Page 67 P2000 Series | User’s Manual Convertible Embedded Computer 3. Put on the washer and fasten the nut with antenna jack. 4. Assemble the antenna and antenna jack together. 5. Attach the RF connector at the another end of the cable onto the card. CN-TB-QP22-44_V1.0...

  • Page 68: Installing A So-Dimm Module

    P2000 Series | User’s Manual Convertible Embedded Computer 3.6 Installing a SO-DIMM Module 1. Locate the SO-DIMM socket on the system board. 2. Tilt the memory module at a 45-degree angle, and insert it into SO-DIMM socket until the golden finger connector of the module is seated firmly. 45°...

  • Page 69: Installing A Pci(E) Card

    P2000 Series | User’s Manual Convertible Embedded Computer 4. For the upper SO-DIMM socket, please follow the same steps described earlier to install. 3.7 Installing a PCI(e) Card 1. Locate the retention module of PCI(e) expansion card. 2. Loosen one screw halfway as indicated to have the clamp arm slidable. clamp arm CN-TB-QP22-44_V1.0...
  • Page 70 P2000 Series | User’s Manual Convertible Embedded Computer 3. Loosen one screw to remove the PCI bracket. 4. Align the notch of golden fingers of PCI(e) card with the expansion slot. Insert the card horizontally, and press the card straight down into the slot until it’s seated firmly. 5..Fasten one screw to secure the PCI(e) expansion card.

  • Page 71: Installing Thermal Pad Of Thermal Block

    P2000 Series | User’s Manual Convertible Embedded Computer 6. Slide the clamp arm of retention module until it contacts the edge of PCI(e) expansion card. 7. Finally, fasten the screw that were previously loosen halfway to fix the retention module. 3.8 Installing Thermal Pad of Thermal Block Place thermal pad on the top of CPU thermal block in order to provide a seamless contact with the body of chassis to create a efficient heat dissipation.

  • Page 72: Installing A Power Ignition Daughter Board (Optional)

    P2000 Series | User’s Manual Convertible Embedded Computer 3.9 Installing a Power Ignition Daughter Board (Optional) 1. Locate the power Ignition connector on system motherboard as indicated. 2. Insert the female connector of power ignition board to the male connector on system motherboard.

  • Page 73: Installing A Poe Daughter Board (Optional)

    P2000 Series | User’s Manual Convertible Embedded Computer 3.10 Installing a PoE Daughter Board (Optional) 1. Locate the PoE connector on system motherboard as indicated. 2. Insert the female connector of PoE daughter board to the male connector on system motherboard.

  • Page 74: Installing The Top Cover

    P2000 Series | User’s Manual Convertible Embedded Computer 3.11 Installing the Top Cover 1. Put on the left edge of top cover onto system, and the other side subsequently. 2. Fasten the six screws at front and rear panel to secure the top cover. CN-TB-QP22-44_V1.0...

  • Page 75: Installing A Sata Hard Drive At Front Panel

    P2000 Series | User’s Manual Convertible Embedded Computer 3.12 Installing a SATA Hard Drive at Front Panel 1. Turn over the system to bottom side, and remove one screw. 2. Loosen the two screws to remove the HDD bay cover bracket. 3.
  • Page 76 P2000 Series | User’s Manual Convertible Embedded Computer 4. Hold the rotating arm to pull out the HDD bracket. 5. Place the HDD bracket on screw-hole side of HDD. Use four screws provided to assemble HDD on the bracket. 6. Align the HDD bracket with the entrance of HDD bay. And insert the HDD bracket and push it until the edge connector of HDD fully inserted into SATA slot.
  • Page 77 P2000 Series | User’s Manual Convertible Embedded Computer 7. Put back HDD bay cover at front panel, and fasten it with two screws. 8. Fasten one screw to secure the HDD bracket on the system chassis. CN-TB-QP22-44_V1.0...

  • Page 78: Installing A Sata Hard Drive On Bottom Side

    P2000 Series | User’s Manual Convertible Embedded Computer 3.13 Installing a SATA hard drive on Bottom Side 1. Turn over the system to bottom side. Locate the cover of HDD compartment. 2. Loosen the two screws, then pull the cover to remove it. 3.
  • Page 79 P2000 Series | User’s Manual Convertible Embedded Computer 4. Place the HDD bracket on screw-hole side of HDD. Use four screws provided to assemble HDD on the bracket. 5. Seat the HDD bracket into HDD compartment, and line up the connector of HDD with SATA slot, then push it until HDD is fully connected into slot.

  • Page 80: Installing A Sim Card

    P2000 Series | User’s Manual Convertible Embedded Computer 7. Put back the cover and fasten the two screws. 3.14 Installing a SIM Card 1. Locate the SIM card slot at front panel. 2. Loosen two screws to remove the cover plate. 3.

  • Page 81: Installing A Cfast Card

    P2000 Series | User’s Manual Convertible Embedded Computer 3.15 Installing a CFast Card 1. Locate the CFast card slot at front panel. 2. Loosen the two screws to remove the cover plate. 3. Insert a CFast card. 4. Fasten two screws to secure the cover plate. CN-TB-QP22-44_V1.0...

  • Page 82: Connecting With Cv Display Module

    P2000 Series | User’s Manual Convertible Embedded Computer 3.16 Connecting with CV Display Module 1.Prepare the mounting kit that accompanied with P2000 as shown. (including two mounting brackets and one screw pack) 2. Remove six screws at left and right panel of PC2000. 3.
  • Page 83 P2000 Series | User’s Manual Convertible Embedded Computer 4.Turn over the system to bottom side. Locate the connector cover of display module. 5. Loosen two screws to remove the cover. The following photos indicates the male connector (on display module) and female connector (on P2000).
  • Page 84 P2000 Series | User’s Manual Convertible Embedded Computer 6. Place the P2000 on the display module through its display connector hole as indicated. 7. Align the mounting holes of P2000 with the screw holes of display module underneath. Then slide the PC2000 carefully as indicated to have P2000 and display module connected together. 8.

  • Page 85: Vesa Mount

    P2000 Series | User’s Manual Convertible Embedded Computer 3.17 VESA Mount The following picture indicates VESA mounting hole pattern on P2000, which is compliant with VESA mounting standard. 1. The following picture uses a panel PC (P2000+CV display module) as a demonstration. To attach the panel PC to a VESA stand, please fasten eight screws as indicated to fix it on the stand.

  • Page 86: Wall Mount

    P2000 Series | User’s Manual Convertible Embedded Computer 3.18 Wall Mount 1. Prepare wall mount kit (two wall brackets and one screw pack) that came with the P2000. De-attach six rubber holes from the mounting brackets as indicated. 2. Assemble two wall mount brackets by fastening three screws at each side. The following picture indicates six wall mounting holes at each side.
  • Page 87 P2000 Series | User’s Manual Convertible Embedded Computer 3. Attach the P2000 to wall by fastening six screws through mounting holes at each side as illustrated. P2000 Wall CN-TB-QP22-44_V1.0...

  • Page 88: Chapter 4 Bios Setup

    Chapter 4 BIOS Setup...

  • Page 89: Bios Introduction

    Industrial Panel PC | User’s Manual CV-100/P2000 Series 4.1 BIOS Introduction The BIOS (Basic Input/Output System) is a program located on a Flash Memory on the motherboard. When you start the computer, the BIOS program will gain control. The BIOS first...

  • Page 90: Main Setup

    Industrial Panel PC | User’s Manual CV-100/P2000 Series 4.2 Main Setup Press <Del> to enter BIOS CMOS Setup Utility, the Main Menu (as shown below) will appears on the screen. Use arrow keys to move among the items and press <Enter> to accept or enter a sub-menu.

  • Page 91: Advanced Setup

    Industrial Panel PC | User’s Manual CV-100/P2000 Series 4.3 Advanced Setup 4.3.1 ACPI Settings This item allows users to configure ACPI settings. ■ Enable ACPI Auto Configuration [Enabled] Enables or disables BIOS ACPI Auto Configuration. 91 91...

  • Page 92: Amt Configuration

    Industrial Panel PC | User’s Manual CV-100/P2000 Series 4.3.2 AMT Configuration This screen allows users to configure related settings of Intel® Active Management Technology. ■ Intel AMT [Enabled] Allows you to enable or disable Intel® Active Management Technology BIOS execution.

  • Page 93: Pch-Fw Configuration

    Industrial Panel PC | User’s Manual CV-100/P2000 Series 4.3.3 PCH-FW Configuration ■ Firmware Update Configuration ❑ ME FW Image Re-Flash [Disabled] Allows you to enable or disable ME firmware image re-flash function.

  • Page 94: F81866 Super Io Configuration

    Industrial Panel PC | User’s Manual CV-100/P2000 Series 4.3.4 F81866 Super IO Configuration The screen allows users to select options for the Super IO configuration, and change the value of the selected option. ■ Serial Port 1~6 Configuration ❑ Serial Port [Enabled] This item allows users to enable or disable serial port.

  • Page 95: Hardware Monitor

    Industrial Panel PC | User’s Manual CV-100/P2000 Series ■ Watch Dog [Disabled] Enables or disables watch dog function. ■ Watch Dog Mode [Sec] Changes the Watch dog mode. Select [Sec] or [Min] mode. ■ Watch Dog Timer [0] User can set a value in the range of 0 to 255.

  • Page 96: S5 Rtc Wake Settings

    Industrial Panel PC | User’s Manual CV-100/P2000 Series 4.3.6 S5 RTC Wake Settings ■ Wake System from S5 [Disabled] This item allows users to change the way to wake system from S5 state. [Fixed Time]: Set the specified time (HH:MM:SS) to wake system.

  • Page 97: Serial Port Console Redirection

    Industrial Panel PC | User’s Manual CV-100/P2000 Series 4.3.7 Serial Port Console Redirection ■ Console Redirection [Disabled] These items allow users to enable or disable COM0, COM1, COM2, COM3, Com4, COM5 console redirection function. 4.3.8 CPU Configuration...

  • Page 98: Sata Configuration

    Industrial Panel PC | User’s Manual CV-100/P2000 Series ■ Hyper-Threading [Enabled] Allows you to enable or disable Intel® Hyper-Threading function of processor. ■ Active Process Cores [All] Allows you to choose the number of active processor cores. Configuration options: [All] [1].
  • Page 99 Industrial Panel PC | User’s Manual CV-100/P2000 Series ❑ Intel Rapid Recovery Technology [Enabled] Enables or disables Intel® Rapid Recovery Technology function. ❑ OROM UI and BANNER [Enabled] Enables or disables option ROM UI banner. ❑ OROM UI Normal Delay [2 Seconds] Changes the delay time for option ROM.

  • Page 100: Csm Configuration

    Industrial Panel PC | User’s Manual CV-100/P2000 Series 4.3.10 CSM Configuration ■ CSM Support [Enabled] This item allows users to enable or disable UEFI Compatibility Support Module (CSM) to support a legacy PC boot process. ■ Boot option filter [Legacy only] This item allows users to select which type of operating system to boot.
  • Page 101 Industrial Panel PC | User’s Manual CV-100/P2000 Series ■ Video [Legacy] This item allows users to select whether to enable the UEFI or legacy option ROM for the video devices. [Do not launch]: Disables option ROM. [UEFI]: Enables UEFI option ROM only.

  • Page 102: Asmedia Sata Controller Configuration

    Industrial Panel PC | User’s Manual CV-100/P2000 Series 4.3.11 Asmedia SATA Controller Configuration ■ SATA Controller 0 Configuration Settings Displays configuration information on SATA Controller 0.

  • Page 103: Usb Configuration

    Industrial Panel PC | User’s Manual CV-100/P2000 Series 4.3.12 USB Configuration ■ Legacy USB Support [Enabled] This item allows users to enable or disable legacy USB support. When set to [Auto], legacy USB support will be disabled automatically if no USB devices are connected.

  • Page 104: Chipset Setup

    Industrial Panel PC | User’s Manual CV-100/P2000 Series 4.4 Chipset Setup This section allows you to configure chipset related settings according to user’s preference. 4.4.1 System Agent (SA) Configuration ■ VT-d [Enabled] This item allows users o enable or disable Intel® Virtualization Technology for Directed I/O...

  • Page 105: Pch-Io Configuration

    Industrial Panel PC | User’s Manual CV-100/P2000 Series Above 4GB ■ MMIO BIOS assignment [Enabled] This item allows user to enable or disable the Above 4GB Memory Mapped IO BIOS assignment. ■ Graphics Configuration ❑ Primary Display [Auto] This item allows users to select which graphics device is used as primary display.
  • Page 106 Industrial Panel PC | User’s Manual CV-100/P2000 Series PCI Express Root Port (Mini PCIe) ❑ PCI Express Port 5 [Enabled] Allows you to enable or disable PCI Express Port 5. ❑ PCIe Speed [Auto] Allows you to select PCI Express interface speed.

  • Page 107: Security Setup

    Industrial Panel PC | User’s Manual CV-100/P2000 Series 4.5 Security Setup This section allows users to configure BIOS security settings. 4.5.1 Administrator Password Administrator Password controls access to the BIOS Setup utility. 4.5.2 User Password User Password controls access to the system at boot and to the BIOS Setup utility.

  • Page 108: Boot Setup

    Industrial Panel PC | User’s Manual CV-100/P2000 Series 4.6 Boot Setup This section allows you to configure Boot settings. 4.6.1 Setup Prompt Timeout [1] Use this item to set number of seconds (1..65535) to wait for setup activation key. 4.6.2 Bootup NumLock State [On] Allows you to select the power-on state for keyboard NumLock.

  • Page 109: Save & Exit

    Industrial Panel PC | User’s Manual CV-100/P2000 Series 4.7 Save & Exit 4.7.1 Save Changes and Exit This item allows you to exit system setup after saving changes. 4.7.2 Discard Changes and Exit This item allows you to exit system setup without saving changes.

  • Page 110: Chapter 5 Product Application

    Chapter 5 Product Application...

  • Page 111: Digital I/O (Dio) Application

    This section describes DIO application of the product. The content and application development are better understood and implemented by well experienced professionals or developers. 5.1.1 Digital I/O Programming Guide 5.1.1.1 Pins for Digital I/O for Cincoze DA series product Item Standard GPIO70 (Pin103)
  • Page 112 Industrial Panel PC | User’s Manual CV-100/P2000 Series 5.1.1.2 Programming Guide To program the Super I/O chip F81866A configuration registers, the following configuration procedures must be followed in sequence: (1) Enter the Extended Function Mode (2) Configure the configuration registers...
  • Page 113 Industrial Panel PC | User’s Manual CV-100/P2000 Series 5.1.1.3 Relative Registers To program the F81866A configuration registers, see the following configuration procedures.
  • Page 114 Industrial Panel PC | User’s Manual CV-100/P2000 Series...
  • Page 115 Industrial Panel PC | User’s Manual CV-100/P2000 Series 5.1.1.4 Sample Code in C Language 5.1.1.4 .1 Control of GP70 to GP77 #define AddrPort 0x4E #define DataPort 0x4F <Enter the Extended Function Mode> WriteByte(AddrPort, 0x87) WriteByte(AddrPort, 0x87) // Must write twice to enter Extended mode <Select Logic Device>...
  • Page 116 Industrial Panel PC | User’s Manual CV-100/P2000 Series 5.1.1.4 .2 Control of GP80 to GP87 #define AddrPort 0x4E #define DataPort 0x4F <Enter the Extended Function Mode> WriteByte(AddrPort, 0x87) WriteByte(AddrPort, 0x87) // Must write twice to enter Extended mode <Select Logic Device>...
  • Page 117 WriteByte(DataPort, (ReadByte(DataPort) ǀ 0x03)) WriteByte(AddrPort, 0x61) // Select configuration register 61h WriteByte(DataPort, (ReadByte(DataPort) ǀ 0x20)) <Leave the Extended Function Mode> WriteByte(AddrPort, 0xAA) Cincoze default GPIO Port base address is 0xA00h 5.1.1.6 DATA Bit Table (DIO) = DI1 value = DO1 value...

  • Page 118: P2000 Digital I/O (Dio) Hardware Specification

    Industrial Panel PC | User’s Manual CV-100/P2000 Series 5.1.1.7 DIO I/O Port Address DI8 DI7 DI6 DI5 DI4 DI3 DI2 DI1 DO8 DO7 DO6 DO5 DO4 DO3 DO2 DO1 Pin Definition Data Bits 0xA03 0xA02 I/O Port address 5.2 P2000 Digital I/O (DIO) Hardware Specification •...

  • Page 119: P2000 Dio Connector Definition

    Industrial Panel PC | User’s Manual CV-100/P2000 Series 5.2.1 P2000 DIO Connector Definition DIO1/DIO2 : Digital Input / Output Connector Connector Type: Terminal Block 2X10 10-pin, 3.5mm pitch DIO1(Out) DIO2(IN) Definition Definition DC INPUT DC INPUT...
  • Page 120 Industrial Panel PC | User’s Manual CV-100/P2000 Series...
  • Page 121 © 2014 Cincoze Co., Ltd. All rights reserved. The Cincoze logo is a registered trademark of Cincoze Co., Ltd. All other logos appearing in this catalog are the intellectual property of the respective company, product, or organization associated with the logo.

This manual is also suitable for:

Cv-112r-r10/p2002ei5-e4-r10Cv-112r-r10/p2002ei5-r10Cv-112r-r10/p2002-i5-r10Cv-112c-r10/p2002-i5-r10Cv-112c-r10/p2002ei5-r10Cv-112c-r10/p2002ei5-e4-r10 ... Show all

Table of Contents