Battery - NETGEAR ReadyDATA 5200 Hardware Manual

Battery

Your system uses a CR2032 battery. Dispose of used batteries according to the
manufacturer's instructions.
DANGER:
Installing the on-board battery upside down, which reverses its
polarities, creates a danger of explosion. Take care to install the battery
properly.
To replace the battery:

1. Open the system and locate the battery holder.
2. Remove the old battery.
3. Install the new battery.
Take care to install the new battery with the correct side up.
Lithium battery
Battery holder
NETGEAR ReadyDATA 5200
Lithium battery
OR
Battery holder
Maintenance
32