Warnings - treesse FUSION SPA User And Maintenance Manual

treesse
DESCRIZIONE DEI COMPONENTI
PANNELLO CONTROLLO

Warnings

Filter blocked warning - If the filter is blocked, a cleaning cycle is triggered automatically.
If the problem persists, the system blocks all functions and the message "FL" is displayed.
In this case the tub will have to be shut down, then started up again after waiting 30 seconds, using the
product's main switch.
Lighting control warning - If there is no communication with the control unit, the system disables the
function and the message "CO" and the temperature are displayed alternately.
The other functions remain available.
Water level warning - In ON and STANDBY modes, if the water level should fail to reach minimum
level for more than 3 seconds a warning is triggered, the message "LL" and the temperature are
displayed alternately, and the recirculation pump, heater and ozonizer are disabled.
The warning and the system reset automatically when normal working conditions are restored.
Water level sensor warning - If there is any malfunction in the water level sensors, a warning is
triggered, the message "FER" is displayed and the functions are disabled.
In this case the tub will have to be shut down, then started up again after waiting 30 seconds, using the
product's main switch.
Pg. 17
treesse