treesse Fusion Spa Operating And Maintenance Manual
  1. Manuals
  2. Brands
  3. treesse Manuals
  4. Swimming Pool
  5. FUSION SPA
  6. Operating and maintenance manual

treesse Fusion Spa Operating And Maintenance Manual

Minipool
Hide thumbs Also See for Fusion Spa:
Table of Contents

Advertisement

Quick Links

See also: Use and Maintenance Manual
minipool
Fusion Spa
Operating and maintenance manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Fusion Spa and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for treesse Fusion Spa

Summary of Contents for treesse Fusion Spa

  • Page 1 Fusion Spa Operating and maintenance manual...
  • Page 3 Dear Customer, We thank you for choosing a Treesse minipool and welcome you to our world of total wellness. We remind you that our products are manufactured with superb quality materials and are accurately tested in compliance with the provisions of the safety regulations in force.
  • Page 4 Introduction Fusion Spa minipool We hope that the use of this minipool provides you with an experience of pure pleasure. If you have problems, contact your authorised dealer or the Manufacturer at one of the following addresses: info@gruppotres.it www.gruppotreesse.it GRUPPO TRE S s.p.a.

  • Page 5: Table Of Contents

    Contents Fusion Spa minipool Safety instructions __________________________________________6 ______________________________________________________8 BEFORE USING THE MINIPOOL... ___________________________________________________ 8 USE ADVICE ____________________________________________________________________________________ 8 TIME IN THE WATER _____________________________________________________________________________ 8 CHROMATHERAPY ______________________________________________________________________________ 8 __________________________________________________________________________________________ 9 ESSENCES AND BATH SALTS _____________________________________________________________________ 9 MINIPOOL FUNCTIONS ____________________________________________________________ 10 FILLING THE MINIPOOL __________________________________________________________________________ 11...

  • Page 6: Safety Instructions

    Fusion Spa Safety instructions minipool GENERAL SAFETY INSTRUCTIONS WARNING! TO REDUCE THE RISK OF INJURY This manual has been prepared to help • The minipool water must never exceed 40°C you get the most out of your minipool in order to avoid hyperthermia.
  • Page 7 Safety instructions Fusion Spa minipool SAFETY INSTRUCTIONS FOR More information MAINTENANCE HYPERTHERMIA Perform maintenance on your minipool Prolonged immersion in hot water may cause on a regular basis as this will maintain hyperthermia, a dangerous condition that the surfaces and functional parts in optimal occurs when the internal temperature of the body exceeds the normal value (37°C).

  • Page 8: Use

    Fusion Spa minipool BEFORE USING THE More information MINIPOOL... CHROMATHERAPY Read these chapters before using your new minipool. They will provide you with useful tips to use it safely with Light is made up of seven basic colours: red, orange, maximum benefit.

  • Page 9: Use

    Fusion Spa minipool ESSENCES AND BATH SALTS More information Inside the minipool DO NOT use foaming detergents, soaps, bath oils, greasy lotions or products that are not Sweet orange essence compatible with the minipool. Otherwise the water can Sweet orange essence is obtained from Citrus sinensis become oily or foamy and it could damage the sand filter, dulcis, a plant of the Rutaceae family.

  • Page 10: Minipool Functions

    Fusion Spa minipool MINIPOOL FUNCTIONS 1 - Control panel 2 - Overflow edge 3 - Whirlpool 4 - Filling / draining plate...

  • Page 11: Filling The Minipool

    Fusion Spa minipool The minipool must ALWAYS remain connected to both the electrical grid and plumbing (filling and draining): this is necessary for filtering, cleaning the filters and maintaining the minipool's water levels and temperature. ALWAYS cover the minipool when inactive. This protects it from the sun's rays, prevents dirt from accumulating inside the bathtub and keeps it from losing heat, thus optimising the efficiency of the heater.

  • Page 12: Mixing Function

    GHOST SYSTEM©, an exclusive patent of Treesse Group, owes its name to the invisibility of the components, fully incorporated in the bathtub. The system is distinguished by two thin internal perimeter slots that host a large number of jets that are properly oriented.

  • Page 13: Chromatherapy

    Fusion Spa minipool CHROMATHERAPY Chromatherapy is standard on the infinity version, while on the version with two perimeter slots it is optional. The light "magically" moves the whirlpool in the bathtub. For this operation see page 14. OVERFLOW EDGE The overflow edge of the minipool collects excess water and conveys it to the collection tanks under the bathtub.

  • Page 14: Control Panel: How To Use It

    Fusion Spa minipool CONTROL PANEL: HOW TO USE IT WHITE KEYPAD LED chromatherapy active LED washing/sanitising (ozone) active LED whirlpool active LED heating active LED emptying in progress LED temperature adjustment LED filling in progress KEYS value decrease key (DOWN)
  • Page 15 Fusion Spa minipool OPERATING MODES ACTIVE MODE In ACTIVE mode, the minipool is maintained in a condition that is readily usable by the user. In this state, if there are no alarms all the functions are operational and the recirculation pump is always active to filter the water.
  • Page 16 Fusion Spa minipool BASIC FUNCTIONS The minipool is powered on by connecting it to the mains. At power-on all the LEDs/keys light up for three seconds, then POWER ON the version (Fxx, e.g., F01) and firmware revision (ryy, e.g., r05) are displayed.
  • Page 17 Fusion Spa minipool OPERATIONAL FUNCTIONS When turned on, the last temperature set by the user is recalled, which can be seen by pressing the key “ ” or “ ”. To change it, press the “ ” or “ ” keys: this will increase/ decrease the displayed temperature by +/- 0.5°C.
  • Page 18 The cycle lasts 20 minutes. In Treesse minipools backwashing is automatic, running automatically every 48 hours of minipool use, but can be forced manually by pressing:...

  • Page 19: Alarms

    Fusion Spa minipool ALARMS If any alarms appear during initial startup, read the instructions provided in the following table. If the solution is not If any alarms appear during initial startup, read the instructions provided in the following table. If the solution is not possible, immediately contact the Manufacturer to request technical support.
  • Page 20 Fusion Spa minipool ALARMS Screen DESCRIPTION OF THE PROBLEM NOTIFICATIONS displayed POSSIBLE SOLUTIONS Problem description: in case of no communication with the chromatherapy controller, the system disables the function and the display shows the "Co" message alternating with the temperature.
  • Page 21 water treatment maintenance...

  • Page 22: Water Treatment

    Water treatment Fusion Spa minipool INTRODUCTION Minipool water that is always clean and clear, but above all bacteriologically pure and free of algae, guarantees safety and comfort for users and offers the pleasure of a safe, relaxing bathtub. The pool water must always be disinfected and disinfectant and have a residual disinfectant content ready to eliminate any new contaminants that may be brought into the bathtub by people or the environment.
  • Page 23 Water treatment Fusion Spa minipool TABLE OF ACTIVITIES Below is a table that summarises all the activities necessary for proper maintenance. Those in blue should be carried out frequently. INFORMA- ACTIVITY FREQUENCY... TION Why check: Minipool water that is always clean and clear, but above...

  • Page 24: Checking The Water Parameters

    Water treatment Fusion Spa minipool CHECKING THE WATER PARAMETERS Specific studies on water balance have found a CONVERSION TABLE correlation of equilibrium among the values of pH, hardness, alkalinity: they must therefore be measured °D = German degrees °f = French degrees frequently and then balanced.
  • Page 25 Water treatment Fusion Spa minipool The optimal values for incoming water are highlighted in the table: the three fundamental water parameters (pH, hardness and alkalinity) are frequently measured and then balanced using specific products, readily available in specialised stores. Minipools installed outdoors or subject to intensive use require more frequent checks of the three parameters as they are subject to the weather (e.g., heat from the sun and rain) and organic substances carried into the...

  • Page 26: Disinfection And Cleaning Of The Water

    Water treatment Fusion Spa minipool DISINFECTION AND CLEANING OF THE WATER DISINFECTION Various micro-organisms (bacteria, fungi, algae) can proliferate in the water of the minipool, fostered by the ELIMINATION OF THE BACTERIAL AND FUNGAL LOAD) constant heat of the water.
  • Page 27 OZONE as they may cause cloudiness (e.g., suntan oil, lotions, cosmetics, etc.). TREESSE minipools come standard with an ozonator, Flocculant is a product that is hydrated and increases which helps to disinfect and purify the water, but its volume when it comes into contact with water. The we also recommend sanitising and maintenance hydrated molecules then "bind"...
  • Page 28 Fusion Spa Water treatment minipool TREATMENT CALENDAR Use this calendar, making a copy of it if necessary, to note the days in which the treatments were done or when they are scheduled. When using multiple additives avoid using them at the same time (try to schedule the activities 2-3 days apart) and note their compatibility: read the information labels or request information from the product dealer.
  • Page 29 Fusion Spa Water treatment minipool TREATMENT DATE DATE DATE DATE DATE DATE Disinfectant treatment: OXYGEN BROMINE SUPER-DISINFECTION Anti-algae treatment Flocculant Anti-foam treatment Anti-fat treatment Sequestering agent Parameter check Minipool water change TREATMENT DATE DATE DATE DATE DATE DATE Disinfectant treatment:...

  • Page 30: Maintenance

    In Treesse minipools the backwashing is automatic, running automatically every 48 hours of minipool When filling is complete, reposition the filter in its...
  • Page 31 Maintenance Fusion Spa minipool ø 0,5-1mm ø 1-3mm INTERIOR - top view Caution! Make sure that the six internal filters are correctly positioned and secured (see figure). Caution! Do not inhale Carefully clean and verify that the gaskets are still in place ø...

  • Page 32: Emptying The Minipool

    Maintenance Fusion Spa minipool EMPTYING THE MINIPOOL Do not leave the empty minipool in DIRECT SUNLIGHT. The surface temperature could rise above 80°C resulting in serious damage, including In general it is good practice to empty the cavitation and the deformation of the surface and bathtub every 30 days, brushing the bottom and components.

  • Page 33: Filling The Minipool

    Maintenance Fusion Spa minipool FILLING THE MINIPOOL Perform a preliminary cleaning of the minipool using a and "AL2 "(maximum level) will be triggered, stopping bit of water and a mild detergent. all operation. In this case, you will have to disconnect...

  • Page 34: Non-Use Of The Minipool For Prolonged Periods

    Maintenance Fusion Spa minipool NON-USE OF THE MINIPOOL Do not use garden hoses for rinsing so as not to fill the plumbing circuit with water again. FOR PROLONGED PERIODS 7 Dry the minipool with deerskin and protect it with In case of prolonged inactivity or at the end of the summer the optional cover.

  • Page 35: Cleaning The Minipool

    Cover the minipool when it is not in use (we recommend stubborn stains (e.g., nicotine), it is possible to use car the optional Treesse cover). In addition to preserving the polish spread with cotton. surfaces, it maintains the water temperature, protects...

  • Page 36: Warranty Conditions

    Fusion Spa Documentation minipool WARRANTY CONDITIONS DISPOSAL AT END OF LIFE Under this warranty, the manufacturer will repair As per Legislative Decree no. 49 art. 13 dated 2014 or replace free of charge only the parts that have "Implementation of WEEE Directive 2012/19/EU on manufacturing defects.

  • Page 37: Troubleshooting

    Fusion Spa Troubleshooting minipool Below are some problems you may encounter while using the minipool. If the solutions offered do not solve the problem contact your dealer or the minipool manufacturer for suggestions. PROBLEM POSSIBLE CAUSE SOLUTION • Water with unbalanced values •...
  • Page 38 Fusion Spa Troubleshooting minipool PROBLEM POSSIBLE CAUSE SOLUTION Unstable pH value A very unstable pH could be caused Refer to the chapters: by a bad balance of total alkalinity page 22 (Complete Alkalimetric Titre - CAT). • Water with unbalanced values Refer to the chapters: (hardness, pH, alkalinity).
  • Page 39 Maximum care has been paid to guarantee the accuracy of this manual. The Manufacturer reserves the right to modify the equipment or the documentation at any time, without notice. Therefore there might be small differences between this manual and the product you have received: we apologise in advance for any inconvenience. The total or partial reproduction of this manual without the Manufacturer's consent is prohibited.
  • Page 40 www.gruppotreesse.it GRUPPO TRE S s.p.a. 01036 Nepi (VT) - Italy S.S. Cassia km. 36.400 Settevene industrial area tel. (+39) 0761 527242 fax (+39) 0761 527223 info@gruppotres.it...

Table of Contents

Save PDF