Temperature; Light/Chromotherapy; Sand Filter Cleaning - treesse FUSION SPA User And Maintenance Manual

COMPONENTS DESCRIPTION
CONTROL PANEL
/
Pg. 15
treesse

Temperature

The temperature setting is adjusted +/- 5° C by pressing one of the
two scroll buttons.
During temperature adjustment the related LED is on.
After 3 seconds of inactivity, the display returns to standby and the
related LED goes off.
The temperature setting options range from 10° C to 40° C.
On start-up the last temperature setting is used.
The default temperature on initial start-up is 35° C.

Light/Chromotherapy

Pressing the LIGHT/CHROMOTHERAPY button activates the
chromotherapy colour sequence.
This function can be activated at any time, even without the usual
water level in the spa.
The 16-colour sequence changes automatically every 15 seconds.
Pressing the LIGHT/CHROMOTHERAPY button again stops the
sequence at the current colour.
manually changes the colours.
Pressing the LIGHT/CHROMOTHERAPY button for 2 seconds
switches off the function.
If not turned off manually, the function stops automatically after 3
hours.

Sand filter cleaning

Water filtration is by means of a sand filter attached to the recirculation
pump.
Cleaning of the filter helps to keep its filtering capacity efficient.
The function can be activated manually, automatically and after a "no
water flow" warning.
This cleaning is independent of the filling, draining, spa or warning
functions, and during cleaning the recirculation pump, heater and
ozonizer are disabled.
During the cleaning cycle the SPA LED flashes.
It is recommended that the sand be changed every 5 years by
contacting the company's support centre.
Pressing the button repeatedly
IMPORTANT
treesse