Unit Display And Operation Controller - Sanyo RCS-BH80UA.WL Instruction Manual

2
OPERATION lamp
TIMER lamp
STANDBY lamp
Remote control receiver
Operation controller
(housed inside)
2 - 4
Unit Display and Operation
Controller for K, X, and T Types
OPERATION TIMER
lamp lamp
OPERATION lamp
This lamp lights when the appliance is turned on.
This lamp lights when the system is being controlled by the timer.
When the unit is in the heating standby condition, the STANDBY lamp lights.
If the unit is used for cooling only, the STANDBY lamp will not illuminate.
This lamp operates only when an alarm occurs.
This section picks up infrared signals from the wireless remote controller
(transmitter).
You can operate this air conditioner using the operation controller without the
wireless remote controller.
Remote control
receiver
STANDBY
lamp
NORM.
OFF TEST
STDBY
OPER. TIMER
Remote control
receiver
TIMER lamp
STAND BY lamp