Operation Without The Wireless Remote Controller - Sanyo RCS-BH80UA.WL Instruction Manual

Operation without the Wireless
Remote Controller
If you have lost the wireless remote controller or if it is not working properly, follow the steps below:
STEP 1
STEP 2
2
STEP 3
STEP 1
STEP 2
2 - 14
To start the air conditioner
Press the ON/OFF operation button (automatically setting cooling or heating operation).
Setting the airflow direction
To adjust the airflow direction, press the SWEEP button as appropriate. You can only set
the airflow for all four sides in the same direction, or have each sweep.
To stop the air conditioner
Press the ON/OFF operation button again.
To start the air conditioner
Operate the receiver switch in the
following sequence:
NORMAL OFF NORMAL.
(automatically setting auto operation).
To stop the air conditioner
Then turn the switch to OFF.
STEP 2 STEP 1, 3
NORM.
OFF TEST
STDBY
OPER. TIMER