Installation Location; Electrical Requirements; Safety Instructions - Sanyo RCS-BH80UA.WL Instruction Manual

Installation Location

• We recommend that this system controller be installed properly by
qualified installation technicians in accordance with the Installation
Instructions provided with the system controller.
• Do not install this system controller where there are fumes or
flammable gases, or in an extremely humid space such as a
greenhouse.
• Do not install the system controller where excessively high heat-
generating objects are placed.

Electrical Requirements

1. All wiring must conform to the local electrical codes. Consult your dealer
or a qualified electrician for details.
2. Wiring must be done by a qualified electrician.
To warm up the system, the power mains
must be turned on at least five (5) hours
before operation. Leave the power mains
ON unless you will not be using this
appliance for an extended period.

Safety Instructions

• Read this booklet carefully before using this system controller. If
you still have any difficulties or problems, consult your dealer for
help.
• The air conditioner is designed to give you comfortable room
conditions. Use this only for its intended purpose as described in
the Instruction Manual.
• Never touch the unit with wet hands.
• Never use or store gasoline or other flammable vapor or liquid near
the air conditioner — it is very dangerous.
• The air conditioner has no ventilator for intaking fresh air from
outdoors. You must open doors or windows frequently when you use
gas or oil heating appliances in the same room, which consume a
lot of oxygen from the air. Otherwise there is a risk of suffocation in
an extreme case.
• Do not turn the air conditioner on and off from the power mains
switch. Use the ON/OFF operation button.
• Do not stick anything into the air outlet of the outdoor unit. This is
dangerous because the fan is rotating at high speed.
• Do not let children play with the air conditioner.
• Do not cool or heat the room too much if babies or invalids are
present.
Power mains
ON
3 - 3
3