Maintenance And Repairs; Disposal - Stihl TS 480i Instruction Manual

Composite cutting wheels
Minimum outside diameter of
thrust washers:
Max. depth of cut:
Diamond cutting wheels
Minimum outside diameter of
thrust washers:
Max. depth of cut:
Abrasive cutting wheels (TS 500i)
Outside diameter:
Max. thickness:
Bore diameter/spindle
diameter:
Tightening torque:
Composite cutting wheels
Minimum outside diameter of
thrust washers:
Max. depth of cut:
Diamond cutting wheels
Minimum outside diameter of
thrust washers:
Max. depth of cut:
TS 480i, TS 500i

Maintenance and Repairs

4.06 in.
(103 mm)
Users of this unit should carry out only
3.9 in.
the maintenance operations described
(100 mm)
in this manual. STIHL recommends that
other repair work be performed only by
authorized STIHL servicing dealers
4.06 in.
using genuine STIHL replacement parts.
(103 mm)
Genuine STIHL parts can be identified
3.9 in.
by the STIHL part number, the
(100 mm)
{ logo and, in some cases, by
the STIHL parts symbol K. The
symbol may appear alone on small
parts.
14 in.
For repairs of any component of this
(350 mm)
unit's air emissions control system,
0.189 in.
please refer to the air emissions
(4.8 mm)
systems warranty in this manual.
0.787 in.
(20 mm)
22 lbf ft
(30 Nm)
4.06 in.
(103 mm)
4.9 in.
(125 mm)
4.06 in.
(103 mm)
4.9 in.
(125 mm)

Disposal

Observe all country-specific waste
disposal rules and regulations.
STIHL products should be disposed of in
approved disposal sites for recycling.
Contact your authorized STIHL
servicing dealer for the latest information
on waste disposal.
English
51