Starting / Stopping The Engine - Stihl TS 480i Instruction Manual

Change the fuel pickup body every year
Drain the fuel tank and allow it to air
N
out
Pull the fuel pickup body out of the
N
tank with a wire hook or other
suitable tool and disconnect it from
the hose
Connect a new fuel pickup body to
N
the hose
Return the fuel pickup body to the
N
tank
TS 480i, TS 500i
Starting / Stopping the
Engine
3
3
1
2
Press the throttle trigger lockout (1)
N
and throttle trigger (2)
simultaneously and hold both down
Move the stop switch (3) to F
N
Release the throttle trigger, stop
N
switch and throttle trigger lockout in
succession – starting throttle
position
5
Press the button (4) of the
N
decompression valve before each
starting procedure
Press the bulb (5) of the manual fuel
N
pump 7-10 times – even when the
bulb is filled with fuel
Starting
Place the cut-off machine carefully
N
on the ground or other solid surface,
ensuring that the abrasive cutting
wheel does not touch the ground or
any objects. There must not be
English
4
39