Starting / Stopping The Engine - Stihl TS 700 Instruction Manual

Hide thumbs Also See for TS 700:
Table of Contents

Advertisement

Opening the filler cap
:
Press the filler cap down as far as
possible with your hand, turn it
anticlockwise (approx. 1/8 of a turn)
and remove it.
Closing the filler cap
:
Fit the cap and turn it until it
engages in the bayonet catch.
:
Press the cap down as far as
possible with your hand and turn it
clockwise (approx. 1/8 of a turn)
until it engages properly.
TS 700, TS 800
Change the fuel pick-up body
every year
:
Drain the fuel tank.
:
Pull the fuel pick-up body out of the
tank with a hook and disconnect it
from the hose.
:
Connect a new fuel pick-up body to
the hose.
:
Return the fuel pick-up body to the
tank.
Starting / stopping the
engine
:
Note the safety instructions. Refer
to the chapter headed "Safety
precautions and working
techniques".
:
Press the throttle trigger
interlock (1) and throttle trigger (2)
at the same time.
:
Hold both triggers down.
:
Move the slide control (3) to START
and hold it in position too.
:
Then release the throttle trigger,
slide control and throttle trigger
interlock in succession =
starting throttle position
English
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ts 800

Table of Contents