GE Logiq 500 User Manual page 381

Page 3 of 18 (Imaging Parameter 3 – Probe Dependent 3) (cont'd)
M Image Frequency EC, UP, P, R
Choose the M-Mode image frequency optimization setting.
Resolution
Normal
Penetration
Further Penetration
Harmonic1
Harmonic2
This parameter is not selectable from the soft menu.
M Gray Scale Map EC, UP, P, R
Choose a M-Mode gray scale default map.
1, 2, 3, 4, 5, 6, 7, 8, 9 or 10.
M Rejection EC, UP, P, R
Choose the M-Mode rejection default level.
Level from 0 to 40 in 2 digit increments.
M Peak Hold EC, UP, P, R
Choose the default M-Mode peak hold function status.
On or Off.
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0
Process image for best resolution.
Compromise between resolution and penetration.
Process image for penetration.
C358 Probe Only—Process image for more penetration.
S222, S317 and C358 Probes Only—Process image with tissue
harmonic frequency.
S222, S317 and C358 Probes Only—Process image with tissue
harmonic frequency.
Custom Display
14–19