Operator Diagnostics
Introduction
Refer to Section 4–3 of the LOGIQ
(P9030TA).
The user is able to run diagnostic tests such as:
The test patterns can be used to adjust the display monitor or
peripheral displays. The system test provides a reduced
(pass/fail) version of the diagnostic used to check the
LOGIQ
Probe Selection
Connect and select the C364 probe for diagnostic test
purposes.
16–34
Operator Diagnostics
System Test 1 (reduced version)
Black & White Test Pattern
Color Test Pattern
Graphics Test Pattern
500 software.
LOGIQ
500 Service Manual
500 Basic Users Manual
2233658–100 Rev. 0