Table of Contents
Advertisement
Entering the currently projected signal into the Entry List [
1. Press the ▲ or ▼ button to select any number.
2. Press the ◀ or ▶ button to select [
Calling up a signal from the Entry List [
Press the ▲ or ▼ button to select a signal and press the ENTER button.
Editing a signal from the Entry List [
1. Press the ▲ or ▼ button to select a signal you wish to edit.
2. Press the ◀, ▶, ▲, or ▼ button to select [
The EDIT window will be displayed.
SOURCE NAME
INPUT
LOCK
SKIP
3. Set the above items and select [OK] and press the ENTER button.
NOTE:
• The input terminal cannot be changed to the currently projected signal.
(STORE)] and press the ENTER button.
(LOAD)]
(EDIT)]
Enter a signal name. Up to 18 alphanumeric characters can be used.
The input terminal can be changed.
Set so that the selected signal cannot be deleted when [
The changes made after LOCK execution cannot be saved.
Set so that the selected signal will be skipped during auto search.
(STORE)]
(EDIT)] and press the ENTER button.
81
5. Using On-Screen Menu
(ALL DELETE)] is executed.
Advertisement
Table of Contents
