Table of Contents
Advertisement
NOTE:
• The light module hours used can be checked in [USAGE TIME] on the menu. Select [INFO.] → [USAGE TIME].
• After a lapse of 1 minute from when the projector displays a blue, black or logo screen, [REF. LIGHT MODE] will automatically
switch to [ECO].
• This projector equips the sensor to detect atmospheric pressure and temperature and the projector controls the power based on
the detected values. When the projector is used in high altitude and high temperature, the light source brightness becomes lower
regardless of the setting for LIGHT MODE. This is called "Forced ECO MODE". Please refer the below table for the conditions and
output power in Forced ECO MODE.
Altitudes
1600–3000 m
(5500–10000 ft)
600–1600 m
(2000–5500 ft)
0–600 m
(0–2000 ft)
• When the projector is in the Forced ECO MODE, the picture brightness decreases slightly and the TEMP. indicator lights orange.
At the same time the Thermometer symbol [ ] is displayed at the bottom of the menu.
When in the Forced ECO MODE, the light mode does not change even if the LIGHT MODE setting is changed. When the atmospheric
pressure sensor detects height over 600 m, the HIGH symbol [
Atmospheric temperature
5–30°C
(41–86°F)
100%
100%
100%
] will be displayed at the bottom of the menu.
41
3. Convenient Features
31–36°C
(87–96°F)
90%
90%
37–40°C
(98–104°F)
70%
80%
80%
Advertisement
Table of Contents
