Table of Contents
Advertisement
Selecting Screen Size for DICOM SIM [SCREEN SIZE]
This function will perform gamma correction appropriate for the screen size.
LARGE ������������������� For screen size of 300"
MEDIUM ���������������� For screen size of 200"
SMALL ������������������� For screen size of 100"
NOTE:
• This function is available only when [DICOM SIM.] is selected for [DETAIL SETTINGS].
Adjusting Color Temperature [COLOR TEMPERATURE]
This option allows you to select the color temperature of your choice.
A value from 5000K to 10500K can be set.
NOTE:
• When [HIGH-BRIGHT] is selected in [REFERENCE], this function is not available.
• When [PRESENTATION] is selected for [REFERENCE], the COLOR TEMPERATURE adjustment changes to 3 levels: 0, 1 and 2.
Adjusting Brightness and Contrast [DYNAMIC CONTRAST]
If [ON] is selected, the most optimal contrast ratio is used according to the picture.
NOTE:
• Depending on the conditions, projector settings such as [DYNAMIC CONTRAST] may not be able to be selected.
Adjusting Brightness [LIGHT MODE]
Adjust the brightness of the projector and save it for each input signal. (→ page 39)
With the [REF. LIGHT MODE] set to [NORMAL], the adjustment will be valid if the PICTURE [MODE] is set to [PRO-
FESSIONAL].
LIGHT ADJUST
CONSTANT BRIGHTNESS
[Brilliant Color]
Selects the brightness of the color white.
Selecting options from [MEDIUM] to [HIGH] increases the brightness of the color white.
NOTE:
• If under [REFERENCE], [HIGH-BRIGHT] or [PRESENTATION] are selected, [BrilliantColor] cannot be changed.
Brightness can be adjusted in 1% increments from 20 to 100%.
OFF
[CONSTANT BRIGHTNESS] mode will be canceled.
ON
Maintains the brightness that is in effect at the time [ON] is selected. Unless [OFF]
is selected, the same settings will remain in effect even when the projector is
turned off.
• To re-adjust the brightness, first turn this setting OFF before making further adjust-
ments.
NOTE:
• [CONSTANT BRIGHTNESS] mode is a function used to maintain the brightness at
a constant level. Color will not be fixed.
• The [CONSTANT BRIGHTNESS] setting will not be saved for each input signal.
85
5. Using On-Screen Menu
Advertisement
Table of Contents
