Table of Contents
Advertisement
Things to note when installing projectors
• Leave 30 cm or over space between each projectors and between the intake vent and the wall for installing projec-
tors side by side, so that air intake of the projectors are not obstructed. When the air intake and discharge outlet
are obstructed, the temperature inside the projector will rise and this may result in a malfunction.
• Two projectors can be stacked on top of each other (STACK setting). (→ page 139) Do not attempt to directly stack
three or more projectors. When the projectors are piled up on top of one another, they may fall down, resulting in
damage and failure.
• Installation example when using 3 or more projectors
The following installation is recommended when installing a combination of 3 or more projectors for multi-screen
projection.
[Installation example]
Air exhaust
Air intake
WARNING
Please request the dealer for special installation services such as when mounting the projector to the ceiling. Never
carry out the installation by yourself. The projector may fall down and result in injury. Please use a sturdy cabinet
that can withstand the weight of the projector for the installation. Please do not pile up the projectors directly on
top of one another.
NOTE:
• For the range of the projection distance, please refer to the Appendix "Throw distance and screen size". (→ page 143)
30 cm or greater
Back
Intake vent
61
4. Multi-Screen Projection
Back
Cabinet
Exhaust vent
Advertisement
Table of Contents
