Table of Contents
Advertisement
5. Press the ▼ button to align with the [CORNERSTONE] and then press the ENTER button.
The screen will switch to the [CORNERSTONE] screen.
6. Use the ▲▼◀▶ button to select one icon (▲) which points in the direction you wish to move the projected
image frame.
7. Press the ENTER button.
8. Use the ▲▼◀▶ button to move the projected image frame as shown on the example.
9. Press the ENTER button.
10. Use the ▲▼◀▶ button to select another icon which points in the direction.
11. Repeat steps from 7 to 10 to complete the cornerstone adjustment.
12. On the [CORNERSTONE] screen, select [EXIT] or press the EXIT button on the remote control.
The confirmation screen is displayed.
13. Press the ◀ or ▶ button to highlight the [OK] and press the ENTER button.
This completes the [CORNERSTONE] correction.
• Returning to the [CORNERSTONE] screen, select [CANCEL] and press the ENTER button.
The drawing shows the upper left icon ( ) is selected.
44
3. Convenient Features
Advertisement
Table of Contents
