Table of Contents
Advertisement
[SOURCE OPTIONS(1)]
Selecting Default Source [DEFAULT INPUT SELECT]
You can set the projector to default to any one of its inputs each time the projector is turned on.
LAST ���������������������� Sets the projector to default to the previous or last active input each time the projector is turned on�
AUTO ��������������������� Searches for an active source in order of HDMI1 → HDMI2 → DisplayPort1 → DisplayPort2 → HDBaseT
→ SDI1 → SDI2 → SDI3 → SDI4 → SLOT and displays the first found source�
HDMI1 ������������������� Displays the digital source from the HDMI 1 IN connector every time the projector is turned on�
HDMI2 ������������������� Displays the digital source from the HDMI 2 IN connector every time the projector is turned on�
DisplayPort1 ���������� Displays the digital source from the DisplayPort1 IN connector every time the projector is turned on�
DisplayPort2 ���������� Displays the digital source from the DisplayPort2 IN connector every time the projector is turned on�
HDBaseT ���������������� Project the HDBaseT signal�
SDI1 ���������������������� Displays the digital source from the SDI1 IN terminal every time the projector is turned on�
SDI2 ���������������������� Displays the digital source from the SDI2 IN terminal every time the projector is turned on�
SDI3 ���������������������� Displays the digital source from the SDI3 IN terminal every time the projector is turned on�
SDI4 ���������������������� Displays the digital source from the SDI4 IN terminal every time the projector is turned on�
SLOT ���������������������� Displays the picture via the optional board (sold separately) inserted into the SLOT�
Selecting a Color or Logo for Background [BACKGROUND]
Use this feature to display a blue/black screen or logo when no signal is available. The default background is [BLUE].
NOTE:
• To change the image displayed as the logo, see page 159.
123
5. Using On-Screen Menu
Advertisement
Table of Contents
