Terex TR60 Maintenance Manual page 150

Front Axle - Wheel, Rim and Tyre
Section 140-0040
TYRE INFLATION PRESSURES
E3 tyres may be so roaded up to 48 km/h (30 mile/h),
maximum, with a 30 minute cooling stop after each
80 km (50 miles) or 2 hours sustained operation -
whichever occurs first - and a 60 minute cooling stop
after each aggregate of 4 hours of operation.
E4 tyres may be so roaded up to 32 km/h (20 mile/h),
maximum, with a 30 minute cooling stop after each
32 km (20 miles) or 1 hour of sustained operation -
whichever occurs first - and a 60 minute cooling stop
after each aggregate of 4 hours of operation.
The inflation pressures listed should be regarded as
nominal only. Specific job conditions, terrain, haul
14
road maintenance and length, maximum and workday
average speed, job t-km/h (ton-mile/h) required and
tyre t-km/h (ton-mile/h) capacity, etc., may require an
increase in inflation pressure. It is recommended that
for tyres both listed and unlisted the user consult the
tyre manufacturer and evaluate all job conditions in
order to make the proper selection.
TYRE INFLATION PRESSURES
BRIDGESTONE TYRE
24.00 R 35** Radial
* * * *
PRESSURE
bar lbf/in²
5.9 87
SM 1579 12-98