Warranty - Titan 1204 Operation And Parts Manual

12. Warranty

TITAN IMPLEMENT, LLC. (the "Manufacturer") warrants, only to the original Purchaser, this equipment will be free
from defects in material and workmanship, under normal use and service, for one (1) year from the date of purchase
providing this equipment is purchased for individual use only. Commercial use of this equipment is not covered
under any warranty. This warranty does not apply to any equipment which has been damaged or which has been
subjected to change, misuse, negligence, abnormal wear and tear, alterations, tampering, or failure to follow operating
instructions. This warranty does not cover any product or parts not manufactured by Titan Implement, LLC.
Titan Implement, LLC rotary cutters have a fi ve (5) year Limited Warranty* on gearbox components provided
they have been properly maintained** and have not been subjected to abuse or misuse except as limited below.
i. Warranty is one (1) year for seals unless seals are damaged from debris wrapped around the input and or
output shaft of the gearbox. After one year, seals are considered to be wearing parts, and the replacement
is the owner's responsibility.
ii. Gearboxes that are subject to warranty may be replaced with new or rebuilt gearboxes at the discretion of
Titan Implement, LLC.
iii. Shearbolts must be approved Grade 2, 1/2" x 3" shearbolts.
**NOTE: "properly maintained" specifi cally includes, but is not limited to:
i. Running gearboxes with the proper amount of correct lubricant.
ii. Adjusting slip clutches correctly to provide proper protection for gearbox components and drive line.
Under this warranty, the Manufacturer will repair or replace any part which the Manufacturer determines has failed
during the period of the warranty due to defects in material or workmanship. After written approval by the manufacturer,
the equipment or defective part must be returned to Titan Implement, LLC.
Warranty coverage and performance is expressly conditioned upon the return of the completed registration form to
Titan Implement, LLC, PO Box 649, Decatur, Tennessee 37322.
Titan Implement, LLC reserves the right to make improvements and changes in specifi cations without notice or obligation
to modify previously sold units. The Owner's Manual describes the proper assembly procedures for your implement
and furnishes operating and maintenance recommendations to help you obtain long and satisfactory service.
PURCHASER'S EXCLUSIVE REMEDY FOR BREACH OF WARRANTY, OTHER DEFECT, OR CONDUCT
GIVING RISE TO LIABILITY SHALL BE THE REPAIR OR REPLACEMENT OF THE PRODUCT SOLD, AND THE
MANUFACTURER UNDER NO CIRCUMSTANCES SHALL BE LIABLE FOR ECONOMIC LOSS OR INCIDENTAL
OR CONSEQUENTIAL DAMAGES. THE MANUFACTURER DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING
THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR PURPOSE.
Purchaser and Titan Implement, LLC hereby (a) submit to the non-exclusive jurisdiction of the courts of competent
jurisdiction in Meigs County, Tennessee, and the United State District Court for the Eastern District of Tennessee
for resolution of any dispute concerning this Limited Warranty or the rights or obligations of Purchaser and/or Titan
Implement, LLC; (b) agree that any litigation commenced in Tennessee in connection with this Limited Warranty shall
be venued in either the Meigs County, Tennessee District Court, or the United States District Court, Eastern District of
Tennessee, Southern Division, and (c) waive any objection it may have as to any such action or proceeding brought in
such court that such court is an inconvenient forum. Nothing herein shall limit the right of Purchaser or Titan Implement,
LLC (or the right of any permitted successor or assign of either) to bring proceedings against the other in the courts of
any other jurisdiction wherein any assets of such other party may be located.
1200-1600 Series Rotary Cutters
August 2016
TITAN IMPLEMENT
LIMITED WARRANTY
*Gearbox warranty limitations:
54 Titan Implement, LLC
(423) 334-0012