Gun Arm Mounts; Change Gun Position (Front And Back) - Graco LineLazer 130HS Operation

Gun Placement

Gun Arm Mounts

This unit is equipped with front and rear gun arm
mounts.
Change Gun Position
(Front and Back)
1. Loosen gun arm knob and remove from gun arm
mounting slot.
14
ti28042a
ti27796a
2. Slide gun arm assembly (including gun and hoses)
out from gun arm mounting slot.
3. Slide gun arm assembly into desired gun arm
mounting slot.
ti27797a
4. Tighten gun arm knob into gun arm mounting slot.
ti27798a
NOTICE
Make sure all hoses, cables, and wires are properly
routed through brackets and do NOT rub on tire.
Contact with tire will result in damaged hoses, cables,
and wires.
ti27795a
3A3392B Operation