Schwinn AC Power Service Manual page 24

5. Remove the outer chainguard.
TECH TIP: Slowly rotate the user right side crank arm toward
the rear of the bike to help with removal of the outer chain-
guard.
6. Use a 9/16" socket to loosen the axle nuts on both sides of
the flywheel.
7. Remove the tension bolt covers from the front of the bike
8. Using a 10mm deep socket, remove the left and right-side
tension screws from the front forks of the bike.
9. With the tension eased, walk the chain/belt off the rear
sprocket
Page 24