Table of Contents
Advertisement
G0830—5" x 6" VS Metal-Cutting Bandsaw Set
Compact and powerful, the G0830 Metal-Cutting
Bandsaw provides variable-speed blade control
from 82–230 FPM, allowing you to conveniently
"dial-in" the optimum cutting speed for nearly any
type of metal workpiece size without having to first
stop and change belt positions. Cut through round
stock up to 5" in diameter and rectangular cuts up
to 4-1/2" x 6" thick with ease.
Figure 25. Model G0830 5" x 6" Variable-Speed
Metal-Cutting Bandsaw.
H2867—Electric Sheet-Metal Shear
This electric sheet-metal shear is double insu-
lated and features a 110V, 2.4A motor with 4500
strokes per minute. Width of cut: 5/32". Cuts 1/16"
mild steel and 3/64" stainless steel. Weighs 4 lbs.
Made in an ISO 9001 factory.
Figure 26. Model H2867 Electric Sheet Metal
Shear.
order online at
Model G0828/G0829 (Mfd. Since 02/17)
www.grizzly.com
G8780—Portable Hand Punch
Producing 1 ton of force, this hand punch has
a 16-gauge capacity in mild steel, brass and
aluminum. Much quicker and safer than drilling
thin stock and leaves no ragged edges. Includes
3/32", 1/8", 5/32", 3/16", 7/32", 1/4" and 9/32" dies
and wrenches.
Figure 27. Model G8780 Portable Hand Punch.
T23085 —Pneumatic Nibbler
This pneumatic nibbler features a lightweight
aluminum housing and cuts up to 16-gauge
steel without leaving burrs or deformed edges.
Adjustable die can be turned to suit various cut-
ting positions. Cuts at 3800 strokes per minute.
Features 1/4" NPT air inlet and working pressure
of 90 PSI.
Figure 28. Model T23085 Pneumatic Nibbler.
1-800-523-4777
or call
-21-
Advertisement
Table of Contents
