IDEC WB2F User Manual page 14

5. Click the Start reading button to read the symbol.
6
5
6. The reading results are displayed.
Blue text indicates "Request (Computer → WB2F)". Red text indicates "Response (WB2F → Computer)".
If the symbol is successfully read, the "reading result" is returned as a response. If reading fails, "?" is returned
as a response. The following shows an example.
Example: ASCII display example
^get･↲ Request: Click the symbol reading start
1234567890･↲ Response: Symbol reading result "1234567890" (successfully acquired)
^get･↲ Request: Click the symbol reading start
?･↲ Response: Symbol reading result "?" (reading failed)
･↲: Represents the ASCII code control characters CR and LF . Since the control characters cannot be
displayed as characters, they have been replaced with other characters. LF alone is displayed as "↲" and
the other control characters are displayed as "･". Check the control characters by switching to the HEX
display mode.
14 / 35
WB2F Support Tool User's Manual
WB2F-SOFT-SUPPORT-TOOL-MANUAL-E B-1956(0)