Table of Contents
Advertisement
7.3.4. Tuning
This screen is for WB2F tuning.
This screen can be used to perform auto tuning, and check and change the reading parameter table.
2
3
8
9
12
13
15
No.
Name
1
Auto tuning table
2
Standard
3
Detail
4
Custom
5
Auto tuning settings
6
All symbol allowed
7
All symbol prohibited
8
Receive
9
Send
10
Save
11
Load
12
Table copy
13
Copy original
14
Copy destination
Reading parameter table
15
settings
22 / 35
WB2F Support Tool User's Manual
1
4
10
11
14
Description
Select the number of the reading parameter table to be saved after Tuning
(No. 3-5) is executed.
Perform standard tuning. Compatible with all symbols.
Perform detailed tuning.
Only compatible with DataMatrix, QR Code, and Micro QR Code.
Perform tuning using Auto tuning settings (No. 5).
Shows the settings for the auto tuning function.
You can check and change settings.
Allow all the supported symbols of custom tuning.
Prohibit all the supported symbols of custom tuning.
The settings configured in the WB2F are displayed in Settings (No. 1, 15).
Apply setting changes to the WB2F. Execute Receive (No. 8) to enable.
Saves the setting values to the setting value region (non-volatile).
Loads the setting values from the setting value region (non-volatile).
Copies the settings in the reading parameter table from Copy original (No.
13) to Copy destination (No. 14).
Select the reading parameter table that will be the copy source.
Select the reading parameter table that will be the copy destination.
Shows the settings of reading parameter tables 0 to 7.
You can check and change settings.
WB2F-SOFT-SUPPORT-TOOL-MANUAL-E
5
7
6
B-1956(0)
Advertisement
Table of Contents
