IDEC WB2F User Manual page 21

■File operation
No. Name
12 Upload
13 Download
■Others
No. Name
14 Advance settings
Follow the appropriate procedure below to receive or send setting values.
■Receiving setting values
(1) Click Receive (No. 6).
(2) [The set value reception was completed.] appears as a pop-up. Click OK.
(3) The setting values set on WB2F are displayed in the Configuration items list (No. 3).
■Sending setting values
(1) After receiving the setting values, edit them in the edit area.
(2) After you finish editing them, click Send (No. 5).
(3) [The set value sending was completed.] appears as a pop-up. Click OK.
(4) The setting values are reflected in WB2F.
(5) Click Save (No. 9).
Saves the setting values to the setting value region (non-volatile).
* Note: If you turn off the WB2F power supply without performing the setting value sending procedure, any setting
changes you made will not be reflected in WB2F. The setting values of RS-232 setting items are reflected
by resetting the unit after you click Save (No. 9).
21 / 35
WB2F Support Tool User's Manual
Uploads all WB2F setting values to a CSV file.
Downloads a CSV file created with Upload (No. 12) to WB2F.
You can select the checkbox to execute Initial (No. 10).
WB2F-SOFT-SUPPORT-TOOL-MANUAL-E
Description
Description
B-1956(0)