1. Manuals
  2. Brands
  3. WAGNER Manuals
  4. Controller
  5. TwinControl 5-60 ABS
  6. Translation of the original operating manual

WAGNER TwinControl 5-60 ABS Translation Of The Original Operating Manual

Electronic mixing ratio controller for 2k paints
Hide thumbs
Table of Contents

Advertisement

Quick Links

Electronic mixing ratio
controller for 2K paints
Translation of the original
Operating manual
TwinControl 5-60 ABS
TwinControl 18-40 ABS
TwinControl 28-40 ABS
TwinControl 35-70 ABS
TwinControl 48-110 ABS
TwinControl 35-150/70 ABS
TwinControl 75-150 ABS
TwinControl 72-300/150 ABS
TwinControl 72-300 ABS
Edition 04/2010
Valid for systems up to
software version V3.XX
II 2G Ex ia II B T4 X
0102
B_02795

Advertisement

Table of Contents
loading

Related Manuals for WAGNER TwinControl 5-60 ABS

Summary of Contents for WAGNER TwinControl 5-60 ABS

  • Page 1 Translation of the original Operating manual TwinControl 5-60 ABS TwinControl 18-40 ABS TwinControl 28-40 ABS TwinControl 35-70 ABS TwinControl 48-110 ABS TwinControl 35-150/70 ABS TwinControl 75-150 ABS TwinControl 72-300/150 ABS TwinControl 72-300 ABS Edition 04/2010 Valid for systems up to Electronic mixing ratio software version V3.XX...

  • Page 3: Table Of Contents

    Safety instructions for the operator 2.1.1 Electrical equipment 2.1.2 Personnel qualifi cations 2.1.3 A safe work environment Safety instructions for staff 2.2.1 Safe handling of WAGNER spray units 2.2.2 Earth the unit 2.2.3 Paint hoses 2.2.4 Cleaning 2.2.5 Handling hazardous liquids, varnishes and paints 2.2.6...
  • Page 4 TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL Contents TRANSPORT / INSTALLATION Transport Storage Installation Pneumatic connections Fluid connections Ensuring suffi cient material Ground the System 5.7.1 Earthing of components on frame or carriage 5.7.2 Example of earthing scheme for basic unit with turbine 5.7.3 Example of earthing scheme for basic unit with cable START-UP AND OPERATION...

  • Page 5: About These Instructions

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL ABOUT THESE INSTRUCTIONS LANGUAGES This operating manual is available in the following languages: Language: Part No. Language: Part No. Language: Part No. German 393830 English 393831 French 393832 Dutch 2309946 Italian 393834 Spanish 393835 Danish...

  • Page 6: Cd Twincontrol

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL Colour valves FWV400, HDV400, GA400AL-D 384880 384881 384882 384883 384884 384885 384887 384886 Colour valves FWV530 or HDV530 377980 377981 377982 377983 377984 377985 377987 377986 CD TWINCONTROL All operating documents specifi ed above are available also as pdf fi les on a Compact disk (CD) and the CD are contained in the scope of delivery of an unit.

  • Page 7: General Safety Instructions

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL GENERAL SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS FOR THE OPERATOR 2.1.1 ELECTRICAL EQUIPMENT Electrical plant and units To be provided in accordance with the local safety requirements with regard to the operating mode and ambient influences. May only be maintained by skilled electricians or under their supervision.

  • Page 8: Safety Instructions For Staff

    PART NO. DOC393831 OPERATING MANUAL SAFETY INSTRUCTIONS FOR STAFF 2.2.1 SAFE HANDLING OF WAGNER SPRAY UNITS The spray jet is under pressure and can cause dangerous injuries. Avoid injection of paint or cleaning agents: Never point the spray gun at people.

  • Page 9: Paint Hoses

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL 2.2.3 PAINT HOSES 2.2.4 CLEANING 2.2.5 HANDLING HAZARDOUS LIQUIDS, VARNISHES AND PAINTS...

  • Page 10: Touching Hot Surfaces

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL 2.2.6 TOUCHING HOT SURFACES CORRECT USE FIELD OF APPLICATION 2.4.1 SYSTEMS WITH TURBINE The system with turbine complies with Explosion Protection Directive 94/9/EC (Atex) and can be used as a Category 2 device in Ex Zone 1. It is designed with ignition protection type „Intrinsic safety“...

  • Page 11: Product Liability And Warranty

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL PRODUCT LIABILITY AND WARRANTY IMPORTANT NOTES ON PRODUCT LIABILITY WARRANTY...

  • Page 12: Ce-Conformity

    ZELM 08 ATEX 0385 X ° ° C < Ta < +40 CE Certificate of Conformity The certificate is enclosed with this product.The certificate of conformity can be reordered from your WAGNER representative, quoting the product and serial number. Part number: 393916...

  • Page 13: Devices With Cable For Mains Connection

    BGR 500 Part 2 chap. 2.29, 2.36 BGR 104 TRBS 2153 Marking: CE Certificate of Conformity The certificate is enclosed with this product.The certificate of conformity can be reordered from your WAGNER representative, quoting the product and serial number. Part number: 393915...

  • Page 14: Description

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL DESCRIPTION FIELDS OF APPLICATION, USING IN ACCORDANCE WITH THE INSTRUCTIONS The TwinControl basic unit comprises 5 functional units: the pneumatically operated high-pressure pumps for A and B components and for solvents, the mixing unit and the control unit. The two material components are brought to high pressure by the pumps and intermixed in an adjustable, predefi...

  • Page 15: Data

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL DATA 4.3.1 BASIC UNITS AND COMPONENTS Part Description: A Pump B Pump Flushing Control TwinControl basic unit pump units 393177 5-60 ABS Turbine Wall TC 1 Turbine 393172 5-60 ABS Turbine Stand EvoMotion EvoMotion EvoMotion...
  • Page 16 TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL Part Description: A Pump B Pump Flushing Control TwinControl basic unit pump units 393150 75-150 ABS Turbine Stand 393163 75-150 ABS Turbine Stand EM TC 2 Turbine 393182 75-150 ABS Turbine Stand SZ Jaguar 75-150 393152 75-150 ABS Turbine Trolley...

  • Page 17: Technical Data

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL 4.3.2 TECHNICAL DATA Description Units Inlet air pressure min. MPa; bar; psi 0.6; 6; 87 Inlet air pressure maxi. MPa; bar; psi 0.8; 8; 116 Maxi. permissible number of strokes by DS/ min pumps in two-component operation Maxi.

  • Page 18: Marking And Rated Data For Devices With Turbine

    OPERATING MANUAL 4.3.3 MARKING AND RATED DATA FOR DEVICES WITH TURBINE Identifi cation Description J. Wagner AG Company name CH- 9450 Altstätten Address CE mark with number of the notifi ed body that is used by us in the production...
  • Page 19 8. When designing and installing the compressed air system, it must be ensured that no explosive atmosphere can arise within the system. 9. Only Wagner potentiometers may be connected to the potentiometer connections. 10. The remote control cable must be laid securely and safely protected from damage.
  • Page 20 TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL 11. If the complete TwinControl system is operated as part of a water varnish coating system connected to high voltage, the green-yellow earth cables must be removed and replaced with black cables with the same cross-section. Earthing symbols must be made unrecognizable.

  • Page 21: Weight Of The Basic Units

    WEIGHT OF THE BASIC UNITS Part No. Description Weight in kg Weight in lb 393172 TwinControl 5-60 ABS Turbine Base frame 393176 TwinControl 5-60 ABS Cable Base frame 393177 TwinControl 5-60 ABS Turbine Wall 393178 TwinControl 5-60 ABS Cable Wall...

  • Page 22: Dimensions

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL 4.3.5 DIMENSIONS TwinControl ABS turbine or cable mounted on the base frame 5-60 18-40 28-40 35-70 Type 35-150/70 48-110 mm; inch 875; 34.5 1577; 62 550; 22 B_02799 TwinControl ABS turbine or cable mounted on the wall 5-60 18-40...
  • Page 23 TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL B_02800 TwinControl ABS turbine or cable mounted on the base frame 75-150 72-300 Type 72-300/150 mm; inch 1015; 40.0 1655; 65.2 735; 28.94...
  • Page 24 TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL B_02822 TwinControl ABS turbine or cable mounted on the trolley Type 48-110 35-150/70 mm; inch 820; 32.28 1769; 69.65 1227; 48.31 TwinControl ABS turbine or cable mounted on the trolley Type 75-150 72-300/150 72-300 mm;...

  • Page 25: Function

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL FUNCTION Basic principle: The paint fl ows continuously and the hardener is metered or injected into the paint in por- tions in intermittent cycles with a slightly higher pressure. Description: The required mixing ratio is entered on the electronic control, and the system can then be started by pressing the button on the electronic control.

  • Page 26: Principle Diagram For Basic Units 18-40; 28-40; 35-70 And 35-150

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL 4.4.2 PRINCIPLE DIAGRAM FOR BASIC UNITS 18-40; 28-40; 35-70 AND 35-150 Control unit 1 Turbine: This control, which generates current from compressed air with a turbine, is suitable for all systems with pumps from 18-40 to 35-150 with single-acting material valves with spring reset.

  • Page 27: Principle Diagram For Basic Units 48-110; 75-150 And 72-300

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL 4.4.3 PRINCIPLE DIAGRAM FOR BASIC UNITS 48-110; 75-150 AND 72-300 Control unit 2 Turbine: This control, which generates current from compressed air with a turbine, is suitable for all systems with pumps from 48-110 to 72-300 with double-acting material valves. Control unit 2 Cable: This control with electrical mains connection is suitable for all systems with pumps from 48-110 to 72-300 with double-acting material valves.

  • Page 28: Operator's Controls On The Control Unit Twincontrol 1 And 2

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL 4.4.4 OPERATOR‘S CONTROLS ON THE CONTROL UNIT TWINCONTROL 1 AND 2 The front of the TwinControl control unit is the same on all 4 device variants. 128 126 127 125 TwinControl B_02601 Push button „Start“...
  • Page 29 TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL Rear wall TwinControl Control unit 1 and 2 with Turbine J. Wagner AG Made in Switzerland CH 9450 Altstätten Type / Typ: TwinControl Serial No unit.: Serie Nr. Anlage: II 2 G...

  • Page 30: Service Functions - Overview List

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL 4.4.5 SERVICE FUNCTIONS - OVERVIEW LIST Software version: B3.30 and C3.30 Item Unit Description Mixed material in the hose adjustable Volume A material from material valve to mixing block adjustable Volume B material from material valve to mixing block adjustable Flushing quantity on A side adjustable...
  • Page 31 TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL Software version: B3.30 and C3.30 0 or 1 Manually leakage check up (0 = no, 1 = yes) adjustable mm/min Warning tolerance for leakage A adjustable mm/min Fault tolerance for leakage A adjustable mm/min Warning tolerance for leakage B...
  • Page 32 TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL Software version: B3.30 and C3.30 Display after stop is pressed: adjustable 0 = Mixing ratio (MV); 1 = Pot life only (P); 2 = Job sum (JS); 3 = MV and P alternating; 4 = MV and JS alternating;...

  • Page 33: Pneumatic Diagram Twincontrol 1

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL 4.4.6 PNEUMATIC DIAGRAM TWINCONTROL 1 Option Gun fl ush box Material valve A Flush Flush Air Hardener valve B Pneumatic horn external Change over signal Pump A Change over signal Pump B No.

  • Page 34: Pneumatic Diagram Twincontrol 2

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL 4.4.7 PNEUMATIC DIAGRAM TWINCONTROL 2 Flush AS Option Flush BS Option Material valve A Hardener valve B Air motor B Gun fl ush box Pneumatic horn external Nr 5 Change over signal Pump A ES 9 ES 1 = Numbers Electrical schematic Change over signal fl...

  • Page 35: Transport / Installation

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL TRANSPORT / INSTALLATION TRANSPORT The complete system can be safely transported in a wooden crate. The dimensions of the transportation crate can be determined with the help of the data of the dimensions in chapter 4.3.5 and the weights of the basic equipments are in chapter 4.3.4 to be found.

  • Page 36: Storage

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL Basic units mounted on trolley xxx kg xxxx lb xxx kg xxxx lb B_02823 B_02825 B_02824 STORAGE...

  • Page 37: Installation

    EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL INSTALLATION The system is installed and commissioned by the Wagner Service department or by an expert representative. When removing from the packaging, check the system parts for pos- sible transport damage. WARNING Electric shock haza rd inside the controller!

  • Page 38: Pneumatic Connections

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL PNEUMATIC CONNECTIONS ➞ Check whether the line pressure is suffi cient. It has to lie between 0.5-0.8 MPa; 5-8 bar; 73-116 psi. WARNING Overpressure! Risk of injury bursting components The operating pressure must never exceed the value shown on the plate.

  • Page 39: Fluid Connections

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL FLUID CONNECTIONS -> Connection of the hose for the cleaning agent (solvent) from the solvent pump via the suction unit into the container. ENSURING SUFFICIENT MATERIAL In the event of hose breakage on the high pressure side or idle running due to lack of ma- terial, the system switches the pumps off automatically.

  • Page 40: Earthing Of Components On Frame Or Carriage

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL 5.7.1 EARTHING OF COMPONENTS ON FRAME OR CARRIAGE View of rear side of system Earth connections To the equipotential bond- ing (operational earth) B_02804 Pos from Cable A-Pump to frame 4 mm ;...

  • Page 41: Example Of Earthing Scheme For Basic Unit With Turbine

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL 5.7.2 EXAMPLE OF EARTHING SCHEME FOR BASIC UNIT WITH TURBINE Ex-Zone 1 and 2 Ex Zone 1 und 2 R max. < 1 MOhm B_02746 Legend 3 TwinControl Frame 5 Work piece 7 Floor conductive 4 Paint container 6 Conveyor...

  • Page 42: Start-Up And Operation

    GENERAL RULES FOR USE OF THE SPRAY SYSTEM Observe general safety instructions in chapter 2. The operating documents provided by Wagner for the pneumatic pumps and other system components should be read through carefully. The appropriate operating manual are avail- able on the Wagner CD as pdf fi...

  • Page 43: Preparation Of Start-Up

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL PREPARATION OF START-UP The following points should be noted before commissioning: ➞ Ensure earthing of the unit and all other conductive parts inside the work area. ➞ Connect spray gun without nozzle with high-pressure hose to the mixing unit and secure with safety catch.

  • Page 44: Switching The Unit On And Off

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL SWITCHING THE UNIT ON AND OFF Return B_02832 Example of TwinControl system ready for spraying...
  • Page 45 TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL B_02836 B_02835 1. Switch on air supply 2. Switch on control air Remark: For TwinControl with turbine: control air drives turbine, electronic is powered by turbine 3. Turn on main switch Remark: Valid only for TwinControl with cable B_02837...

  • Page 46: Preliminary Washing And Pressure Tightness Test

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL PRELIMINARY WASHING AND PRESSURE TIGHTNESS TEST The units are tested in the factory with emulsifying oil, pure oil or solvent. Possible residues must be fl ushed out of the circuits with a solvent (cleaning agent) before commissioning.
  • Page 47 TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL 7. Relieve pressure of fl ushing agent circuit. Close return ball valve of fl ushing pump and turn compressed air controller down. Release the gun and trigger, holding the metal part of the gun against the bucket and pointing it into the earthed bucket, until no further pressure is present.

  • Page 48: Pressure Relief Procedure

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL PRESSURE RELIEF PROCEDURE The pressure must always be relieved - when the spraying tasks are fi nished - before servicing the system - before carrying out cleaning tasks on the system - before moving the system to another location - if something needs to be checked on the system - if the nozzle is removed from the gun.
  • Page 49 TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL 4. Release the gun 5. Hold electrically conductive part of the gun against the metal container and trigger until no further pressure is present. 6. Secure gun. 7. Provide collection container and open return ball valve for A- and B- component and fl...

  • Page 50: Filling The Unit And Calibration

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL FILLING THE UNIT AND CALIBRATION WARNING Do not exchange the two components A and B! Equipment damage by hardened paint Mark unit parts and paint container, so that the components A and B are not exchanged. SIHI_0061_GB 6.6.1 FILLING THE UNIT...

  • Page 51: Flush System

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL 8. Repeat the calibration in order to check it. Large deviations may be due to the following error causes: - There is air in the lines -> Fill lines with material and check suction system. - High proportion of air bubbles in the material in the measuring cup ->...

  • Page 52: General

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL WARNING High-pressure spray jet! Danger to life from injecting paint or solvent Never reach into the spray jet. Never point the spray gun at peole. Consult a doctor immediately in the event of skin injuries caused by paint or solvent.

  • Page 53: Password Protection And User Functions

    The parameters P13, P14, P15, P17, P18 and P19 can be seen only. The passwords, which are set by Wagner with the distribution of the equipment, are not contained for safety reasons in the manual. The valid passwords are communicated to the...

  • Page 54: Brief Description Of The Individual Functions

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL 6.10 BRIEF DESCRIPTION OF THE INDIVIDUAL FUNCTIONS Description of the press buttons: Change numbers. Set -> „+“ (higher) or „-“ (smaller) Terminate data input -> Push button „Stop“ Save numbers -> Set Main menu ->...

  • Page 55: Extended Functions With Password Protection

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL 6.10.2 EXTENDED FUNCTIONS WITH PASSWORD PROTECTION Adjusting the mixing ratio Press SET -> change value with + - push button. Press SET again to confi rm new value (Abort with STOP push button) TwinControl B_02744 Manual mode / Totals...
  • Page 56 TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL Total amount A To Re-Set „0“: Press „SET“ push button > 2 seconds. Display in liter. TwinControl B_02744 Total amount B To Re-Set „0“: Press „SET“ push button > 2 seconds. Display in liter. TwinControl B_02744 Total amount fl...
  • Page 57 TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL Calibration (Password entry required for PO) Calibration A Start: -> open gun -> discharge approx. 5 dou- ble strokes at spray pressure -> close gun -> Set -> input measured value in measuring cup in ->...
  • Page 58 TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL Service (Password entry required for PO) Content of spray hose with mixed material TwinControl B_02744 Quantity material valve A up to mixing block TwinControl B_02744 Quantity material valve B up to mixing block TwinControl B_02744 Flushing quantity on A side...
  • Page 59 TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL Service Service parameters P0 - P70 Confi guration parameters P100 - P148 (see also section 4.4.5) Change from P0 to P1..P2... with „+“-button. TwinControl Return with „-“-button B_02744 Pot life Set the pot life [min]. Set, „+“...

  • Page 60: Maintenance

    – The occupational safety state of the liquid spray devices is to be inspected as required, however at least every 12 months by an expert (e.g. Wagner service technician). – In case of non-operative units the test can be postponed until the next start-up.

  • Page 61: Maintenance And Service

    WARNING Maintenance and service tasks! Risk of explosion Maintenance and service tasks inside the housing may only be - performed by trained Wagner staff, and only in the absence of any potentially explosive gas atmosphere. SIHI_05051_ENG...

  • Page 62: High Pressure Hose

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL HIGH PRESSURE HOSE The lifetime of the fluid hoses is even with appropiate handling reduced due to enviromental influences. Frequent view and occasional functional test is recommended. As precaution fluid hose should be replaced after a specified period by the plant operator.

  • Page 63: Trouble Shooting

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL TROUBLE SHOOTING If a fault occurs, it is indicated: ➞ the horn sounds and the system stops. An error code appears on the display. ➞ the fault is acknowledged with the [Stop] button. If the alarm signal sounds, it is advantageous to be able to determine which operating situ- ation has caused the error.

  • Page 64: Faults And Appropriate Solutions

    Upward speed B Pump B sags in upward stroke Check material supply Alarm Password The software is not enabled Enter software password Wagner AG password (only possible on PC) Wrongly adjusted air Turbine speed to low Adjust air pressure pressure...
  • Page 65 Revision of A-valve B-valve worn out B-valve has too many cycles Revision of B-valve Alarm EEPROM Reading or writing to the EEPROM Contact Wagner Service is not possible Alarm ADC Reading the potentiometer values Contact Wagner Service is not possible...
  • Page 66 TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL Software version: B3.30 and C3.30 Code Cause Description of faults Troubleshooting Flow rate is too high The current fl ow is above the set Check nozzle and pump pressure value Flow rate is too low The current fl...
  • Page 67 TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL...

  • Page 68: Conversion Of Different Mixing Proportion Specifi Cation

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL CONVERSION OF DIFFERENT MIXING PROPORTION SPECIFICATION...

  • Page 69: Tables / Parameters

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL TABLES / PARAMETERS TABLE HOSE VOLUME Di = Inside diameter hose L = Hose length Vol = Material volume in the hose...

  • Page 70: Accessories

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL ACCESSORIES Part No. Description 2306526 Mixer external pneumatic NW 2.6/ NW6 KS B_02977 2307749 Mixer external pneumatic NW 2.6/ NW10 GXP B_02977 2307030 Mixer external manual NW8/ NW10 VA B_02978 2307031 Circulation mixer NW8 external B_02979...
  • Page 71 TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL Part No. Description Control connection circulation soft J. Wagner AG Made in Switzerland CH 9450 Altstätten Control unit with turbine Type / Typ: TwinControl Serial No unit.: Serie Nr. Anlage: Re-tooled devices in the...
  • Page 72 TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL Part No. Description 2307080 Circulation soft Tiger B_02984 2308874 Remote control TwinControl B_02985 2303255 Heater set A or B for TwinControl to 35-150 B_02986 2302813 Heater set A for TwinControl 48-110 to 75-150 B_02988...
  • Page 73 TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL Part No. Description 2302461 Heater set B for TwinControl 48-110 to 75-150 B_02987 2303256 Heater set A for TwinControl 72-300 B_02989 2303257 Heater set B for TwinControl 72-300 B_02990 2303278 Heater set A double for TwinControl 72-300 B_02991...
  • Page 74 TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL Part No. Description 2302563 Connecting set GFB 1 The connecting set Gun Flush Box 1 can be used together with a TwinControl equipment with the control unit type 1. The connecting set Gun Flush Box 1 is necessary as link between the TwinControl equipment and a Gun Flush Box...
  • Page 75 TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL...

  • Page 76: Spare Parts

    Risk of injury and damage to the equipment Repairs and part replacement may only be carried out by spe- cially trained staff or a WAGNER service center. Before all work on the unit and in the event of work interrup- tions: - Switch off the energy/compressed air supply.

  • Page 77: Where Do You Fi Nd Spare Parts

    TwinControl EDITION 04/2010 PART NO. DOC393831 OPERATING MANUAL 11.2 WHERE DO YOU FIND SPARE PARTS? Spare parts to the TwinControl basic equipments, to whose components and to the TwinControl accessories are in a separate spare parts catalogue to fi nd. Spare parts cata- logues are available in the languages German and English.
  • Page 78 Telephone: +41 (0)71 757 2211 Telefax: +49 7544 505200 Telefax: +41 (0)71 757 2222 E-Mail: service.standard@wagner-group.com E-Mail: rep-ch@wagner-group.ch Belgium Denmark WAGNER Spraytech Benelux BV WAGNER Industrial Solution Scandinavia Veilinglaan 58 Viborgvej 100, Skærgær B- 1861 Wolvertem DK- 8600 Silkeborg Telephone: +32 (0)2 269 4675...
  • Page 80 393831...

This manual is also suitable for:

Twincontrol 18-40 absTwincontrol 35-150/70 absTwincontrol 75-150 absTwincontrol 72-300/150 absTwincontrol 72-300 absTwincontrol 28-40 abs ... Show all

Table of Contents