General - WAGNER TwinControl 5-60 ABS Translation Of The Original Operating Manual

EDITION 04/2010
OPERATING MANUAL
High-pressure spray jet!
Danger to life from injecting paint or solvent
SIHI_0059_GB
6.8

GENERAL

➞ The fl ushing agent pressure for A and B and the material pressure for the A and B
components must always be present on the device during operation.
➞ Make sure that the nozzle is inserted in the gun when feeding the material hose. The
fl ushing process must always be performed without the nozzle in the gun.
➞ It is important that the level in the A and B material containers and in the fl ushing
material container is checked visually, in order to prevent unintended interruptions in
the spray process.
PART NO. DOC393831
Never reach into the spray jet.
Never point the spray gun at peole.
Consult a doctor immediately in the event of skin injuries caused
by paint or solvent. Inform the doctor about the paint or solvent
used.
Never seal defective high-pressure parts, instead relieve the
pressure from them and replace.
Wear the appropriate protective clothing, gloves, eyewear, and
respirator.
WARNING
TwinControl .
52