EDITION 04/2010
OPERATING MANUAL
8
TROUBLE SHOOTING
If a fault occurs, it is indicated:
➞ the horn sounds and the system stops. An error code appears on the display.
➞ the fault is acknowledged with the [Stop] button.
If the alarm signal sounds, it is advantageous to be able to determine which operating situ-
ation has caused the error. Troubleshooting can be carried out in accordance with the list
in chapter 8.1.
➞ Faults caused by a defect in the control box may only be remedied by a trained expert
(e.g. workshop electrician)!
Electric shock haza rd inside the controller!
Danger to life from electric shock
SIHI_0045_GB
PART NO. DOC393831
WARNING
May only be installed/maintained by skilled electricians or un-
der their supervision.
Are operated in accordance with the safety regulations, fire and
electro-technical rules.
The voltage is switched off before work is begun on active com-
ponents.
TwinControl
.
63