System Log - D-Link DWM-311 User Manual

Section 3 - Configuration
This section provides details about firmware memory usage.
Memory management will not be necessary for normal usage and
is beyond the scope of this manual.
When connected, this will list the external IP address from your
IPv4 WAN Status:
LTE network provider. This may be necessary for certain advanced
applications such as private networking, diagnostics, or VPNs.
This section provides a full log of system events, including
information about WAN connectivity and LTE Module status.
The logging features are intended for diagnostics and advanced
users only, and are beyond the scope of this manual. Log entries
are time stamped based on the modem's internal clock. The level
of detail in the system log and the size of the log buffer can be
adjusted in the Admin panel, and is discussed in "System: Log
Settings" on page 20.
D-Link DWM-311 User Manual
Memory
Network

System Log

11