D-Link DWM-311 User Manual page 10

Section 2 - Installation
3. Once the antennas are placed, attach both antenna cables to the DWM-311's external SMA connectors, labelled DIV and PRI. Turn the hexnut
clockwise to secure the cables.
Note: The included antennas are interchangeable. Third party antennas may require connection to specific ports.
The modem can be powered either directly via mini-USB or via Power over Ethernet (PoE) using a PoE splitter.
Using included Mini-USB cable
Use the included mini-USB AC adaptor to power the modem. Attach the USB connector to the included AC adaptor. Attach the AC adaptor to a wall
socket. Insert the mini-USB connector into the port on the modem labelled with the symbol. The power LED will turn green to indicate the modem
is receiving power.
Using Power over Ethernet (PoE)
The DWM-311 can be powered via Power over Ethernet (PoE) (sold separately) by connecting a 5.5 mm DC to mini-USB adaptor (sold separately)
to a PoE splitter. This may be useful when long cable lengths required. Standard PoE has a range of up to 330 ft (100 m). The following steps outline
setting up the modem with a PoE Splitter/Injector kit.
1. Verify your PoE splitter is set to output 5 volts.
Warning: Higher voltages may damage the DWM-311.
2. Attach the PoE splitter's DC-OUT to the DWM-311's mini-USB power input using the DC-to-Mini-USB adaptor (sold separately). The power input
is labelled with the symbol.
D-Link DWM-311 User Manual
Powering the Modem
7