Admin; Config - D-Link DWM-311 User Manual

Section 3 - Configuration
The Admin panel allows the user to change time settings, the administrator password, log settings, auto-reboot settings, and manually upgrade
the firmware. On each screen, click Apply to save changes or Reset to revert changes.
System: General Settings
Hostname The host name of the modem over LAN connections.
Local Time: Displays time according to the modem's internal clock. Click Sync
with Browser to automatically set the modem's clock based on
the client's current time. Note: this function only sets UTC time.
For the time to be correct, the user must specify the correct time
zone.
Timezone: Set the current time zone. This must be correctly set for Sync
with Browser and automatic Daylight Savings Time settings to
function.
Use LTE Network Check this box to automatically synchronize time settings with the
Time: LTE network operator.
Enable NTP Enabling NTP Client allows the modem to sync its clock with a
Client: time server.
NTP servers: If Enable NTP Client is selected, input NTP server addresses here.
By default, OpenWRT's servers are used.
Date and Time: Configure date and time manually. DST is adjusted based on time
zone.
Click Apply to save changes or Reset to revert changes.
D-Link DWM-311 User Manual

Admin

Config

19