Optane Memory Module - HP 17 Maintenance And Service Manual

Optane memory module

IMPORTANT:
drive. You cannot simultaneously install both an Optane memory module and a solid-state drive in the
computer.
Description
Optane memory module, 16 GB
Before removing the Optane memory module, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the optical drive (see
5. Remove the bottom cover (see
6. Remove the battery (see
Remove the Optane memory module:
▲ Remove the Phillips M2.0×3.0 screw (1), and then pull the solid-state drive module from the socket (2).
Reverse this procedure to install the Optane memory module.
44 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
The M.2 connector that supports the Optane memory module can also support a solid-state
Optical drive on page
Bottom cover on page
Battery on page
32).
36).
38).
Spare part number
Lxxxxx-001