Optane Memory Module - HP 15 Maintenance And Service Manual

Optane memory module

IMPORTANT:
drives. You cannot install both an Optane memory module and a solid-state drive in the computer.
Description
Optane memory module, 16 GB
Before removing the Optane memory module, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the optical drive (see
5. Remove the bottom cover (see
6. Remove the battery (see
Remove the Optane memory module:
▲ Remove the Phillips M2.0×3.0 screw (1), and then pull the solid-state drive module from the socket (2).
Reverse this procedure to install the Optane memory module.
The Optane memory module is installed into the M.2 connector that is used by M.2 solid-state
Optical drive on page
Bottom cover on page
Battery on page
33).
37).
40).
Component replacement procedures
Spare part number
L20383-001
49