Solid-State Drive - HP 17 Maintenance And Service Manual

Solid-state drive

IMPORTANT:
module. You cannot simultaneously install both an Optane memory module and a solid-state drive in the
computer.
Description
512 GB, PCIe, NVMe
256 GB, PCIe, NVMe
256 GB, SATA-3, TLC
128 GB, SATA-3, TLC
Before removing the solid-state drive, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the optical drive (see
5. Remove the bottom cover (see
6. Remove the battery (see
Remove the solid-state drive:
Remove the Phillips M2.0×3.0 screw (1), and then pull the solid-state drive module from the socket (2).
▲
Reverse this procedure to install the solid-state drive.
The M.2 connector that supports a solid-state drive can also support an Optane memory
Optical drive on page
Bottom cover on page
Battery on page
32).
36).
38).
Component replacement procedures
Spare part number
L22584-001
L22583-001
L22582-001
L22581-001
45