Heat Sink Assembly - HP 17 Maintenance And Service Manual

Heat sink assembly

Description
Heat sink for use in models with Intel Core processors and integrated UMA graphics
Heat sink for use in models with Intel Core processors and discrete graphics
Heat plate for use in fanless models with Intel Pentium and Celeron processors
Before removing the heat sink, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the optical drive (see
5. Remove the bottom cover (see
6. Remove the battery (see
To remove the heat sink assembly from products with integrated UMA graphics:
1. In the order indicated on the heat sink assembly, remove the four Phillips M2.0×3.0 screws (1) that
secure the heat sink to the computer.
2. Lift the heat sink assembly from the computer (2).
56 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Optical drive on page
Bottom cover on page
Battery on page 38).
32).
36).
Spare part number
L22531-001
L22530-001
L22532-001