Installation Requirements; Positioning The Mixer Valve - Bristan Artisan Evo Installation Instructions And User Manual

Installation Requirements

Positioning the mixing valve
The Mixing Valve can be positioned on
either a wall surface or fl at on the fl oor.
(Refer to the diagrams for the correct
orientation of the Mixing Valve).
The Mixing Valve can be installed in either
an airing cupboard, loft space or under the
bath. Do not site the Mixing Valve where it
may be subjected to freezing conditions or
ambient temperatures over 40ºC.
The maximum distance from the Mixing
Valve to the Wireless controller must not
exceed 10 metres as this is beyond the
operating range of the wireless controller.
Wireless installation considerations
As with any wireless / radio product:
- Metallic lined materials or metal
objects (such as steel baths or metal
tanks, etc.) can signifi cantly reduce the
operating range of the wireless interface
or prevent operation.
- Interference from other radio signals
has the potential to affect the ability of the
wireless interface to function correctly.
Note: If the Mixing Valve loses wireless
communication with the controller, the
shower will automatically turn off safely.
DO NOT INSTALL UPSIDE DOWN ON
THE WALL!
Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.
Flat on the fl oor
Vertically down on the wall
Vertically up on the wall
DO NOT INSTALL HORIZONTALLY ON
THE WALL!
9