Bristan Artisan Evo Installation Instructions And User Manual page 23

Maintenance
Battery Replacement
The Wireless Controller is powered by two
AA batteries which are designed to last
approximately 1 year based on average
showering usage before they need
replacing.
When the batteries run low and require
replacing, the red low battery LED on the
front face of the display will fl ash.
To replace the batteries the following
should be carried out;
Remove the Wireless Controller from the
wall bracket by twisting the locking ring
clockwise to unlock the Wireless
Controller from the backplate.
Remove the old batteries and replace with
new AA batteries.
Note: Batteries must be 1.5V AA (LR6)
Alkaline batteries (preferably =>2000mAh
for good battery life).
Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.
Important: Do not use re-chargeable
batteries.
Important: Incorrect insertion of the
Red low
batteries may damage the batteries.
battery LED
Re-attach the Wireless Controller onto the
locking ring once the new batteries have
been inserted. Twist the locking ring
anti-clockwise to lock the Remote Control
in position.
23