Bristan Artisan Evo Installation Instructions And User Manual page 17

Installation
Drill a 25-30mm hole in the ceiling /
plasterboard at the required position for
the shower arm.
Screw the shroud onto the top thread of
the arm.
Place the top thread of the arm through
the hole in the ceiling / plasterboard and
secure in place using a G1/2 backnut.
Using a suitable thread sealant connect
the brass union fi tting to the thread of the
arm.
Note: The shroud should be fl ush against
the ceiling / plasterboard to hide the hole.
Screw the shower rose onto the lower
thread of the arm, ensuring the sealing
washer supplied is fi tted between the
thread and the rose connection.
Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.
- Ceiling Fed Arm & Rose
Shroud
Arm
1/2"
connection
Sealing
Washer
Celing
Arm
Arm
Sealing
Washer
Rose
17