Installing The Awning Rail (If Necessary) - Lippert Components Solera Installation And Owner's Manual

Installing The Awning Rail
(If Necessary)
NOTE: Awning rail not included�
1. Position the awning rail along the line where roof and
wall meet or:
A. For pitched awnings: A minimum of 6" above doors or
windows
B. For flat awnings: A minimum of 4" above doors or windows
A
B
Fig.1
Letter Description
A Awning Rail
B Support Arm Assembly
C Roll Tube Assembly
lci1�com 574-537-8900
Solera
Smart Arm
Installation and Owner's Manual
(For Aftermarket Applications)
NOTE: The awning rail must be level and parallel with the
floor line of the unit (Fig.1)�
2. After determining the awning rail's proper location,
mark its position with a non-permanent method of
marking�
3. Seal the back of the awning rail�
4. Align the awning rail on the wall and secure with
3/4
#10 x " screws, using all fastener holes�
front facing view
C
floor line
Page 3
Awning
®
™
CCD-0001253
B
Rev: 11�15�18