Removing The Oven Door Glass, Hinges, & Handle - Whirlpool GBD307PD Manual

REMOVING THE OVEN DOOR GLASS, HINGES, & HANDLE
CAUTION: When you work on the double
oven, be careful when handling the sheet metal
parts. Sharp edges may be present, and you
can cut yourself if you are not careful.
1. Remove the oven door from the oven (see
page 2-3 for the procedure).
2. Place the oven door on a padded work
surface with the front decorative glass
facing down.
3. Remove the two top door liner screws and
the two door glass bracket screws, and lift
the liner assembly off the decorative door
glass and handle.
Top Liner Screws
Door Glass
Bracket Screws
4. To remove the outer door glass:
a) Remove the three outer glass holder
screws and two outer glass bracket
screws from the door liner.
b) Lift the outer glass with the glass holder
off the door liner.
c) Remove the bracket.
Outer Glass Holder Screws
Outer Glass Bracket Screws
5. To remove the center door glass, re-
move the bottom bracket, (it is loose), and
slide the two top corners of the glass out of
the door liner slots.
Center Door Glass Corners
Center Door Glass
Remove Loose Bracket
4-14
Outer Door Glass