Whirlpool GBD307PD Manual page 25

7. To remove the upper blower motor as-
sembly:
a) Remove the upper rear cover from the
oven (11 screws) .
Upper Rear Cover
b) Remove the four screws from the blower
cover and remove the cover.
2 Screws Blower Cover
c) Disconnect the two wires from the up-
per blower motor terminals.
Upper Blower Motor Assembly
4 Mounting Screws
d) Remove the four mounting screws.
8. To remove the lower blower motor as-
sembly:
a) Remove the upper rear cover (see step
b) Disconnect the two wires from the lower
Lower Blower
Motor Assembly
2 Screws
2 Wires
c) Remove the three air duct screws and
4-5
7a) and the lower rear cover (8 screws).
Lower Rear Cover
blower motor terminals.
3 Air Duct Screws
Lower Blower Motor Assembly
4 Mounting Screws
the four mounting screws.
2 Wires