Removing The Oven Door - Whirlpool RBD245PD Use And Care Manual

Electric built-in ovens
Hide thumbs Also See for RBD245PD:
Table of Contents

Advertisement

Removing
the oven door
(standard-cleaning
ovens
only)
Removing the oven door will help make it
easier to clean the oven.
Personal
Injury Hazard
l
Oven door is heavy. Use both hands to
remove the oven door.
l
Grasp only the sides of the oven door.
Do not use the handle for lifting.
Failure to properly grasp the oven door
could result in personal injury or product
damage.
To remove:
I, Open the door all the way.
r removal pin
one in each hole)
2. Insert a door removal pin into each hinge
hole from the inside, out.
3. Close the door
V4
of the way shut or until
it contacts the pins.
4. Grasp the sides of the oven door. Move
door toward oven and lift slightly
to
remove.
5. Set door aside on protected surface.
To replace:
1. Fit hinge arms into slots in frame.
I
2. Open the door all the way.
3. Remove the door removal pins from
each hole.
4.
Close the door.
NOTE: If the door does not operate freely,
you have not installed it properly. Repeat
Steps l-4.
40

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents