Removing An Oven Shutdown Thermal Fuse - Whirlpool GBD307PD Manual

REMOVING AN OVEN SHUTDOWN THERMAL FUSE

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so could result in death or
electrical shock.
CAUTION: When you work on the double
oven, be careful when handling the sheet metal
parts. Sharp edges may be present, and you
can cut yourself if you are not careful.
1. Disconnect the electrical power to the
double oven.
2. Pull the oven out of its mounting location,
(see page 4-4 steps 1 through 3 for the
procedure), so that you can access the
rear covers.
3. Depending on the thermal fuse you are
servicing, remove the upper or lower rear
cover from the oven (see page 4-5 for the
procedure).
Upper Oven
Shutdown
Thermal Fuse
Lower Oven
Shutdown
Thermal Fuse
4. Disconnect the wires from the thermal
fuse terminals.
5. Remove the two screws and remove the
fuse from the rear of the oven.
4-11
Mounting
Screw (1 of 2)
Oven Shutdown
Thermal Fuse