Loading And Unloading; Unauthorized Conversion And Manufacture Of Spare Parts - horsch LEEB 4 LT Operating Instructions Manual

If protective features are subjected to wear,
¾
they must be inspected at regular intervals
and replaced in due time!
Spare parts must at least meet the technical
¾
requirements specified by the equipment
manufacturer! This is ensured when using
original spare parts from HORSCH LEEB AS!
For the storage of gas use only nitrogen for
¾
filling - danger of explosion!
1.7 Loading and
unloading
WARNING
Danger of accident when using an inappropriate
tractor and if the brake system of the machine is
not connected with the tractor or not filled!
Hitch the machine properly to the tractor be-
fore the machine is loaded on or off a transport
vehicle!
For loading and unloading the machine only
use a tractor which meets the specified power
requirements!
Only start to drive with the coupled machine
after the operating pressure required to release
the pneumatic brake system has been reached
(pressure gauge on tractor).
NOTE
1.8 Unauthorized
conversion and
manufacture of spare
parts
WARNING
Danger of crushing, cutting, being caught,
being pulled in and impact caused by the
breakage of load bearing components.
The following is generally prohibited:
drilling in frame and undercarriage
¾
enlargement of existing bore holes on frame
¾
and undercarriage
welding on load bearing parts
¾
Conversions or changes to the machine are only
permitted in agreement with the manufacturer.
Original spare parts and authorized accessories
serve your safety.
This also applies for welding work on load bear-
ing components.
The use of parts other than the ones specified
may result in the rejection of liability for result-
ing damage.
Use only conversion and accessory parts ap-
proved by HORSCH LEEB AS GmbH, e.g. to
maintain the validity of the type approval as per
national and international regulations.
The following machines must be in a condition
that is determined by the corresponding accept-
ance or approval:
Vehicles with a governmental type approval
¾
facilities and equipment connected with a ve-
¾
hicle with a valid type approval or an approval
for road traffic.
23