Bulkhead (8800-1-2_ And 8800-3-2_); Multiplexer; Gland Seal (8800-8-1 And 8800-8-3); Bulkhead (8800-8-2) - Geokon 8800-2-1A Instruction Manual

26
Model #
8800-1-1A
8800-1-1B
8800-3-1A
8800-3-1B
8800-3-1C
B.2.2 Bulkhead (8800-1-2_ and 8800-3-2_)
For use with sensor cables that have a male, 10-pin bulkhead connector attached. The
sensor cable is connected to the Node via an external female, 10-pin bulkhead connector
(see Section 2.3.2).
Model #
8800-1-2A
8800-1-2B
8800-3-2A
8800-3-2B
8800-3-2C
B.3 Multiplexer
Multiplexer model types are distinguished by their sensor connection options.
B.3.1 Gland Seal (8800-8-1 and 8800-8-3)
For use with sensor cables that have stripped and tinned ends. The sensor cables pass
through external cable glands and are wired into the terminal blocks according to Section
3.3.2.
Model #
8800-8-1
8800-8-3
B.3.2 Bulkhead (8800-8-2)
For use with sensor cables that have a male, 10-pin bulkhead connector attached. The
sensor cables are connected to the Multiplexer via external female, 10-pin bulkhead
connectors (see Section 3.3.1).
Cable Connection
Cable Gland
Cable Gland
Cable Gland
Cable Gland
Cable Gland
Table 13 - Gland Seal Node Models
Cable Connection
10-Pin Bulkhead
10-Pin Bulkhead
10-Pin Bulkhead
10-Pin Bulkhead
10-Pin Bulkhead
Table 14 - 10-Pin Bulkhead Node Models
Connection Type
Cable Gland
Cable Gland
Table 15 - Gland Seal Multiplexer Models
Model#
8800-8-2
Table 16 - 10-Pin Bulkhead Multiplexer Models
Frequency
2.4 GHz
2.4 GHz
900 MHz
900 MHz
900 MHz
Frequency
2.4 GHz
2.4 GHz
900 MHz
900 MHz
900 MHz
Cable Glands
Size
4 mm to 7.8 mm (0.16" to 0.31")
4 mm to 7.8 mm (0.16" to 0.31")
9.9 mm to 14.2 mm (0.39" to 0.56")
Connection Type
10-Pin Bulkhead
Region
North America
International
North America
Brazil
Australia
Region
North America
International
North America
Brazil
Australia
Qty
8
5
2